Joerns Healthcare Oxford Comfort Schlinge Benutzerhandbuch Seite 3

English
Fitting the Sling from a Seated Position
1
Fitting the Sling from a Lying Position
1
Draw sheet roll the client onto the sling, ensuring that the top of the commode aperture is at the base of the
spine. Position the spreader bar as shown opposite and the client is ready for lifting.
GOLDEN TIPS
1. THE CLIENT'S POSTURE CAN BE ALTERED BY PUSHING DOWN ON SPREADER BAR
PIVOT HANDLE.
2. ATTACH SECURI3 CLIPS TO THE SPREADER BAR.
3. ENSURE ALL GREEN SAFETY LOOPS ARE VISIBLE BEFORE LIFTING.
The comfort sling is fitted to the patient in the traditional
way. Fitting from the seated position requires the carer to
raise the clients leg and feed the leg support piece under
and up between the legs. Repeat this procedure for other
leg. Ensure the sling is not twisted or creased under the
thigh. Bring both leg pieces together and feed through
the modesty strap.
Position the rear section of the sling up and around the
shoulders and head, the client is then ready for lifting.
Oxford
®
Comfort
3