Switrace iPlug IPMT8-D Bedienungsanleitung Seite 3

Das Display dient als Indikator für den jeweligen Status der Aufzeichnung, wie der
untenstehenden Tabelle entnommen werden kann.
Drücken Sie währen der Aufzeichnung kurz den On/Off Knopf, damit Sie sehen können in
welchem Status sich das Gerät gerade befindet.
Hier sehen Sie die Bedeutungen:
Appearance of Display
Februar, 2017
Display Verständnis
Meaning
Ready
Ready state / Device has not been started.
Starting the device
Keep the button pressed and a sequence of 4 steps will
appear. Once the sequence is complete the START message
will appear on the display.
Start delay
If a start delay has been set, you will see a countdown
indicating the time left before the device actually start to
record.
Interacting when device is running
If you press the button while the device is running, the real
time temperature will appear on the display (not stored),
along with Alarms situation so far.
Device is taking a sample.
When the sampling interval is reached, the device will read
and save the temperature, and will automatically display
this information, along with the Alarm situation so far.
Stopping the device
With the device running, keep the button pressed and a
sequence of 4 steps will appear. Once the sequence is
complete, the STOP message will appear on the display.
Stopped
Device is in a STOP state, and will alert you of eventual
triggered alarms. After 5 second another screen will appear,
indicating T.Max/T.Min/T.Avg.
I-Plug pdf
I-PLUG Multiuse pdf
Page 3 of 6