EXCHANGING THE COLOUR DISKS
First disconnect the transformer from the wall socket.
Attention: Wait until the halogen lamp has cooled down.
Hold the casing at the back and unscrew the window-ring on the front with the seliger
special key (ill. A). Take the colour disk cautiously into your hand so it does not break.
Attention: When exchanging a colour disk, neither touch the inner part of the lamp
nor the halogen lamp.
Insert a new colour disk (ill. B) and screw the window-ring on. This way, the halogen
lamp is watertight again.
Ill. A
Ill. B
12
TECHNICAL DATA
TRANSFORMER
Input voltage:
Voltage:
Protection:
®
Built in accordance:
SPARE PARTS
Spare bulb 10 W, set of 2 G4:
ACCESSORIES
Set of 5 colours:
On-off-switch:
regiles® Water fi lter system
regiles® fi lter cartridge
All spare parts and accessories are available from your dealer
ENGLISH
Protected against overload and over-temperature
ENGLISH
230V~ / 50 Hz/ 22 VA
12V~ / 10 VA
with DIN EN 60742
40131
40116
40009
59000
59001
.
13