Opus 560.967 Bedienungsanleitung Seite 17

Faulty activation
In order to prevent faulty activation, the installation
location should be located at least 1 m from a light.
Movements (e.g. vibration) of the device have the same
effects as movements in the detection range (e.g. trees,
shrubs) and can trigger faulty activation.
For this reason, solid device installation is therefore
necessary.
Sensor exhibits
The motion sensor exhibits the most dependable
detection behavior when the detection range is passed
through transversally
2
motion detector. (see Illustrations)
Electrical connection
Strip the insulation from the connecting wires for
approx. 6-8 mm and connect as follows:
4
See wiring diagrams .
5
• Phase L on terminal L.
•
Connecting/lamp wire (brown) on terminal L↑.
•
For remote switching (Manual ON), connect the
external button to terminal T.
Connection of consumers
High starting currents severely reduce the useful life.
For this, follow the technical instructions of the lamp or
light manufacturer.
and not frontally to the
3
2
4
5 L
N
3
6-8MM
D
GB
NL
F
I
P
17