Herunterladen Diese Seite drucken

ETT Distribution MLS-48 Bedienungsanleitung Seite 2

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Introduce
Dear customer,
we gratulate of getting your new soldering iron!
With this choice you have decited to a product which
combines good design and practical technical features.
Please read the following advice carefully and work
accordingly to these advice to get troubleless fun with
the unit.
Features
Soldering needle to sold and desold electric and electronic compnents at printed ciruits and module
And to tin-plate conducting path and ends of lead. Also is this needle usefull at hobbyworks.
Savety Device
Use this needle with caution!
Unqualified and carless use cause heavy hurts or fire.
Interrupt power source when you do not work with the needle.
Dont put the needle on the table or other heat unresistant surfaces.
Please use a especially heat resistant standing unit for soldering irons.
Dont leave the system unattended when the needle is hot.
At the first works with the unit there can be some smoke or smell.
This is normal and is getting of at the 3-5 use the system.
Please pay attention that soldering tin contents toxic lead components and during work
Arising toxic smoke.
Therefore take care of a good ventillation and do not eat during the soldering work.
Keep the system away from children.
Operation
At first fix the iron-standing-holder to the housing of the unit.
Connect the AC-Cord to a 230V Source with an protective ground-connector.
When you turn the adjustknob clochwise you will hear an „klick" and the power LED will light.
Now the system is ON.
When you turn the Adjustnob further you can adjust the requested temperature.
The spron who is fixed on the housing you must keep wet with destillated water.
This sprong is usefull to clean the tip of the solder and gives a long distance to use the tip.
For work on electronic komponents which are sensitive against electrostatic load use an antistatic
Wristband and connect it to the plug which is placed at the back of the housing.
Owners Manual
Soldering Station "MLS-48"
ETT Distribution GmbH Schmalbachstraße 16 38112 Braunschweig
Nachdruck oder Vervielfältigung nur mit ausdrücklicher Genehmigung Stand 12/2016
1540013

Werbung

loading