Imperial BEATSMAN Bedienungsanleitung Seite 37

6. OPERATING
FM Radio operation
To ensure optimum fM reception, please use the cable antenna
provided.
Note:
You can also optionally use the AuX 3.5 mm cinch cable provided as
an antenna.
> Connect the cable antenna with the AuX socket of the
BEATSMAN.
> Switch the product on.
> press the MOdE key to go to radio operation.
> the status LEd will blink in long intervals.
When using the radio mode for the first time, or if you have changed
your location since last using the radio mode, you will have to perform
a programme scan. In the course of this scan, the BEATSMAN will
store all radio stations that can be received at your location.
> To start the scan, press the Play/Pause key (6), the status
LEd will blink at short intervals.
The scan will be completed after approximately 1 minute. The product
will play the first station found.
> Press the Title Select keys (4,5) to select the next or
previous station.
> turn the volume control to the right to reduce the volume,
or to the left to increase the volume.
37 IMPERIAL BEATSMAN
E