Klarstein 10032029 Handbuch Seite 16

EN
16
Table 1
Indicator (From left to right)
The first indicator lights at 100% brightness (S) (Default setting)
The second indicator lights at 100% brightness (S)
The third indicator lights at 100% brightness(S)
The fourth indicator lights at 100% brightness (S)
The fifth indicator lights at 100% brightness (S)
The sixth indicator lights at 100% brightness (S)
8. Connect the appliance with the power source, the first indicator (the default
grinding time setting) lights at 100% brightness while the other indicators and the
indicator of Start/Stop button light at 50% brightness. And then select your desired
grinding time by following
"Step 6" based on your demand. After it, press the Start/Stop button, the
appliance starts to grind coffee bean under the selected grinding time, after a
while, the coffee powder dispenses from the coffee powder outlet. The indicator of
Start/Stop button keeps blinking during grinding process
Notes:
• The appliance will enter into the sleep state if no any operation within 90 seconds
after plug in.
• he appliance must rest for 30 minutes if it is operated for 5 minutes continuously.
• And it is suggested to operate this appliance for less than 90s per time and
minimum 90 seconds rest time must be maintained between continuous two cycles.
• You can press Start/Stop button to make the appliance stop running at any time
during the grinding process.
9. When desired grinding time has reached, the coffee grinder will stop working
automatically and go back to standby condition, at that time, the first indicator (the
default grinding time setting) lights at 100% brightness while the other indicators
and the indicator of Start/Stop button light at 50% brightness
NOTE: The maximum amount of ground coffee container is 155g, make sure the coffee
ground shall not overflow
10. Stecken Sie den Netzstecker des Geräts aus, entfernen Sie den affeepulverbehälter
und entnehmen Sie das Kaffeepulver.
Grinding time
in minutes
5
10
20
30
40
50