CircAid juxtafit Gebrauchsanweisung Seite 5

the hand wrap's thumb hole. The
seam should run from the base of
the thumb to the wrist. The
curved portion of the wrap should
be in the palm of the hand.
Step 2: Unroll the band closest to
the fingers and secure it with the
velcro tab to the hand wrap with
firm and comfortable
compression. The top edge of the
hand wrap should line up with the
base of the fingers.
Step 3: Wrap the remaining band
around the wrist and secure the
Velcro tab. Be sure not to over
tighten the wrist band so that
fluid can freely move out of the
hand. The circaid juxtafit
essentials hand wrap should
overlap with the circaid juxtafit
essentials arm.
Note:
Once all bands are secured inspect
the garment for any gaps or
creases. Adjust the bands as
necessary.
Removing the circaid® juxtafit®
essentials hand wrap
Step 1: Detach the bands, starting
with the wrist band, and fold
them back onto themselves to
keep the Velcro tabs lint-free.
Step 2: Detach the inner Velcro tab
(palm) and slide the wrap of the
hand.
circaid® juxtafit® essentials glove
Step 1: Once your circaid juxtafit
essentials arm garment is in it's
proper position and secured, slide
the circaid juxtafit essentials
glove over the hand.
Step 2: Ensure that the glove is
pulled high enough so that it
overlaps with the arm garment.
Step 3: Fasten the wrist band to
the glove. Be sure not to
overtighten the wrist band so that
fluid can freely move out of the
hand.
English
English