Werbung
Verfügbare Sprachen
Verfügbare Sprachen
resonances, the sound should be reflected in different ways. A shelf with many books of
different sizes can do the trick. However, you can also buy so-called diffusers, specially
designed for the diffusion of sound waves.
If you think an excellent low-frequency performance is important, we recommend you to
leave enough space between the speakers and the back wall.
The removement of unnecessary high-frequency killers, e.g. by drawing the curtains,
can result in a more dynamic sound. We recommend that you use dampening material
sparingly and only in the case of real disturbances.
Keep the curtains open!
Make sure, while setting up the speakers, that the distance between the speakers can
be 1.2 times as much as the distance between the speakers and the listener. All of this,
results in a large sound stage, and every single instrument is better separated from the
others in terms of room space.
Changing fuses:
Under normal operation the fuses should not blow. Usually a blown fuse is caused by
overload or faulty conditions. Do not change the fuse by yourself; this should be done by
an authorized technician. If the fuse blows immediately after turning on the power, then
the speaker should be returned to a dealer for repair.
Specifications:
Type:
Frequency Range:
Rated output power:
Rated output
power:RMS
Crossover frequency:
THD
S/N
HF driver:
Power requirements:
Dimensions (W x H x
D):
Galax 5
178.940
53Hz - 20kHz
55Hz - 20kHz
100W Music
150W Music
15W/35W
15W/50W
3kHz
0.05 / 0.02
0.05 / 0.02
>90dB
RIBBON
220-240Vac /
220-240Vac /
50Hz
165 x 200 x
200 x 250 x
265mm
Galax 6
Galax 8
178.943
178.946
40Hz - 20kHz
180W Music
15W/75W
2.6kHz
2.4kHz
0.05 / 0.02
>90dB
>90dB
RIBBON
RIBBON
220-240Vac /
50Hz
50Hz
250 x 305 x
315mm
390mm
Galax 10S
178.950
35Hz - 165Hz
350W Music
175W
-
>90dB
-
220-240Vac /
50Hz
382 x 322 x
398mm
Werbung
