Raidon GT4670-SB3 Bedienungsanleitung Seite 6

6. Introduction of the RAIDON Host Adapters
! !
The GT4670-SB3 utilizes the SATA port multiplication function where storage read/write of
data to multiple hard drives can be performed through one single eSATA interface connection
rather than multiple. In other words, once you've connected the GT4670-SB3 using the eSATA
interface connection to the computer system, all hard drives installed would appear on the
operating system for storage purposes. However, this would mean the eSATA host
connectivity in the computer system will also require to being equipped with the port
multiplication function. Normally, if your computer system is not equipped with such, you are
required to purchase an eSATA expansion adapter card with the port multiplier function
available. You may check with your supplier of the GT4670-SB3 or various computer storage
component resellers to purchase an adapter card. If you have any questions about
purchasing, please log on to www.raidon.com.tw for more information or contact RAIDON
! ! support.
7. Frequently Asked Questions
!
Q1. Which drive format should I choose to format the hard drive in the GT4670-SB3?
A : It depends on the computer system you most often use. See the below suggestions:
1. Use NTFS format for Windows 2000 / XP / Vista / Windows 7 system
2. Use HFS+ (Mac OS Extended) format for a Mac OS X system
3. Choose FAT32 format if you'll use the GT4670-SB3 in both Windows and Mac
environments
(the maximum size of one single file may not exceed 4 GB).
! !
! !
! !
! !
! !
! !
! !
! !
! !
! !
SafeTANK GT4670-SB3 User Manual
! 6