Hardware Installation; Visual Status Indicator Definitions - Raidon GT4670-SB3 Bedienungsanleitung

4. Hardware Installation

!
!
Please follow the instructions below to complete the hardware installation.
!
Step 1 Open the package and take out the product making sure that all the enclosed contents
are not damaged or missing. Should you find damages or missing contents, please
contact your supplier immediately.
Step 2 Place the enclosure on a stable surface, ensure that it is well ventilated without
blockage to the vent and kept away from locations near water or where the product
may become vulnerable resulting in damages.
Step 3 Use the provided key in the accessories kit and inserted into the key access opening
to eject the removable drive tray latch and extract the removable drive tray.
Step 4 Mount your hard drives onto the removable drive tray and secure it with the screws
included in the accessory kit to avoid any damage to the hard drive due to accidental
movements.
Step 5 Choose one of the provided cables of your preference to connect the preferred
interface connection on the enclosure unit to the computer.
Step 6 Attach the AC power cable to the power socket. Once completed, you may power on
the unit.
!
Once your computer has also booted, your operating system should recognize the drive
automatically. If the hard drive installed requires formatting, follow the formatting instructions
given by the operating system to format the drive volume to your preference. Once the
formatting has been completed, the device is ready for use.
!

5. Visual Status Indicator Definitions

!
!
Power on / HDD Idle
Power on / HDD Access
Power on / HDD Fail
!
SafeTANK GT4670-SB3 User Manual
GT4670-SB3
Blue flash
! 5
Blue
Red