Werbung
Range-Checking Your Radio System
The radio system should be checked before operating the vehicle to ensure it's operating properly and has adequate range.
1. Turn on the transmitter first and then the vehicle.
2. Have a friend hold the vehicle while keeping hands and loose clothing away from moving parts.
3. Walk away until you are at the farthest distance you plan to operate the vehicle.
4. Steer the vehicle back and forth and throttle both forward and reverse making sure there is no erratic behavior.
5. If any erratic behavior is exhibited do not operate the vehicle, call customer service for further assistance.
Maintaining Your Vehicle
Just like a full size car or truck your RC vehicle must undergo periodic maintenance in order to ensure peak running performance. Preventative
maintenance will also help avoid needless breakages which could result in costly repairs. Below are some suggestions to properly maintain
your vehicle.
REPLACE ANY NOTICEABLE
BENT OR BROKEN PARTS
CHECK WHEEL NUTS MAKING
SURE THEY'RE SNUG
CHECK SLIPPER CLUTCH IF
APPLICABLE, FOR PROPER
OPERATION (SEE PAGE 25 STEP
23 FOR SETUP INSTRUCTIONS)
RANGE-CHECKING FOR DISTANCE
CHECK FOR WEAR ON
THE BALL JOINTS IN THE
CHECK DRIVESHAFT SET
STEERING AND SUSPENSION
SCREWS AND RE-THREAD
LINKS (REPLACE IF NECESSARY)
LOCK IF NECESSARY
CHECK TIRES MAKING SURE
THE BEADS ARE STILL FIRMLY
BONDED TO THE ENTIRE
KEEP CHASSIS FREE OF DIRT
CIRCUMFERENCE OF THE RIM
OR DEBRIS
CHECK RECEIVER ANTENNA
TO CONFIRM IT'S NOT
CHECK STEERING
DAMAGED
OPERATION FOR ANY BINDS
INSPECT SHOCK
ABSORBERS FOR SMOOTH
DAMPENED OPERATION
CHECK FOR LOOSE SCREWS
ON CHASSIS ESPECIALLY
THE KNUCKLE, C-HUB AND
AXLE LOCKOUT SCREWS
INSPECT THE SPUR AND
PINION GEARS FOR DAMAGE
6
CHECK FOR ANY LOOSE
CONNECTIONS OR FRAYED
WIRING
CHECK DRIVELINE FOR
SMOOTH BIND-FREE
OPERATION
REPLACE TRANSMITTER
AA'S IF THE GREEN LIGHT IS
BLINKING
Werbung
