Contrast Shower - HANSGROHE RainBrain 15841 Serie Gebrauchsanleitung

Contrast shower

The shower program contrast shower makes it possible to shower with
alternating hot and cold water.
Switch on contrast shower:
• Press the menu button in the basic configuration (ill. 1).
• You can activate the contrast shower in the menu window. The contrast
shower is switched on only if a shower is active (ill. 2).
• An icon indicating that the contrast shower is active appears in the basic
configuration (ill. 3). You can switch off the contrast shower by pressing
this icon.
Configure contrast shower:
• Press the menu button in the basic configuration (ill. 1).
• In the menu press the wrench icon on the right next to the contrast shower
(ill. 2).
• The submenu for configuring the contrast shower appears (ill. 4). The speed
at which the temperature change occurs can be changed at 5 levels. 1 =
slowest, 5 = fastest. The temperature of the contrast shower can be lowered
by 30°C / 54°F. The base level is that which is displayed in the basic
configuration.
In the basic configuration you can now see how the set temperature changes
in time with the contrast shower.
The contrast shower and cascade cannot be active at the same time. Head,
side, and hand showers can be selected and deselected while the contrast
shower is active. The maximum temperature of the contrast shower is 42°C
/ 108°F.
1
°C
38,
Warm up
34,
Volume
13:56
50
Operating instructions
°C
5
0
Menu
English:
Menu
2
Music
off
Contrast shower
off
Cascade
off
Settings
Back
3
38,
Warm up
Back
4 Contrast shower
Speed
Temperature reduction
Back
°C
5
OK
3
3°C
Start