Turning On/Off - elv E10BT Bedienungsanleitung

Turning On/Off

Press and hold 'multifunction' button for 1 second to turn on. With Bluetooth on,
press and hold 'multifunction' button for 2 seconds to turn off.
Pairing
1. Before pairing, make sure E10BT is turned off. (Refer to Turning On/Off section
for reference)
2. To put the E10BT into Bluetooth discovery mode, press and hold the 'multifunction'
button until blue LED is flashing rapidly. (This mode will last 5 minutes)
3. Follow your smartphone operating procedure for putting the device in Bluetooth
discovery mode. Your smartphone should find the E10BT in discovery mode.
Select E10BT headset to finish pairing. (If password is required during the pairing
process, enter"0000")
Connecting Automatically
If your smartphone has been paired successfully with your earphone, the two
devices will connect automatically if they are within the effective distance (10m)
and effective time (10 minutes); if the earphones are outside the effective distance
for over 10 minutes, the earphones will automatically power off.
Answering Incoming Calls
When receiving an incoming call, press the 'multifunction' button to answer the
call. Press the 'multifunction' button again to hang up.
Reject Incoming Calls
When receiving an incoming call, rapidly and consecutively press 'multifunction'
button twice to reject the call.
Last Number Redial
Press the 'multifunction' button twice in rapid succession to redial the last number.
Call Waiting
During a call, press the 'multifunction' button twice in rapid succession to switch
from active call to incoming call.
Press the 'multifunction' button once to hang up on the current call and answer
the incoming call.
Press and hold the 'multifunction' button to put the current call on hold and answer
the incoming call.
06