Navitel R1000 Benutzerhandbuch Seite 27

5 | USER MANUAL
GPS location
Parking monitor
Motion detection
EN
Battery
Screen saver
APP support
Device supports built-in GPS chipset and GPS antenna, it can show longitude, latitude and other informa-
tion on your current location. Press GPS Status to check GPS dates. Press On in the GPS Stamp menu to
add GPS information to your files.
When the device in the standby mode will detect the vibration, it will automatically start recording. If for
one minute vibration will not happen again, the device goes into standby mode.
Motion detection function is available in the Parking mode (disabled by default). In the Video record
mode, select "Motion event REC". When an object is moving the device will automatically start recording.
If the object does not move for more than 10 seconds, recording stops.
Red indicator lights up when the device is plugged into an external power supply; as the battery is
charging, the red will gradually dim; the red light going out means the battery is full.
The device can automatically shut off the screen to reduce power consumption; time interval can be
set in the Screen Saver menu.
You can see and share your videos and photos, taken by DVR, in your mobile phone through special app.
The app is connecting via Wi-Fi network and should be installed on your mobile phone.