Optimizing Performance; Maintenance; Troubleshooting - Qlima FWK 1628 Gebrauchsanweisung

OPTIMIZING PERFORMANCE

• To ensure maximum performance and efficiency, place your wine cooler in an
area where there is proper air circulation.
• Allow for proper clearance around the wine cooler :
Sides: 19 mm
Top: 100 mm
Back: 50 mm
• Do not place the unit in direct sunlight.
• Do not place heavy objects on top of the wine cooler.
INTERNAL MAINTENANCE
• Shut off the power supply before cleaning the unit's cabinet.
• Remove all wines and storage shelves.
• Clean the unit's interior with a warm water and neutral detergent solution.
• Thoroughly dry all surfaces.
Note:
a. Do not use abrasive cleaners to clean the wine cooler.
b. Use mild, soapy water to clean the unit's door seal.
c. To ensure efficient operation, also thoroughly clean the back and bottom of
the wine cooler. Make sure the power supply is turned off prior to cleaning
the back and bottom of the wine cooler.
TROUBLE SHOOTING
To prevent unnecessary expense, we recommend that you always first carefully
consult the instructions for use. Take the wine cooler to your dealer for repairs if
these instructions do not provide a solution.
Symptoms
The wine cooler does
not cool.
The wine cooler does
not get cold enough.
Possible cause
The unit is not plugged in. Plug in the unit.
The voltage is incorrect.
A fuse may be broken.
The temperature setting
may be incorrect.
The wine cooler may be
placed too close to a heat
source.
There is insufficient venti-
lation.
The door is not completely
closed or the door seal is
not working properly.
Solutions
Ensure proper voltage.
Have the unit's fuse replaced.
Make sure the set temperature
is correct.
Keep the wine cooler away
from direct sunlight or other
heat sources.
Place the wine cooler in an area
with proper ventilation and
clearances.
Close the door tightly. Do not
open the door frequently and
do not keep the door open for
extended periods of time.
4
65