Functional Description; Intended Use; Machine-Specific Safety Warnings; Technical Data - Bosch GRW 11 E PROFESSIONAL Bedienungsanleitung

OBJ_BUCH-309-001.book Page 10 Friday, January 19, 2007 8:18 AM
e) Maintain power tools. Check for misalign-
ment or binding of moving parts, breakage
of parts and any other condition that may
affect the power tool's operation. If dam-
aged, have the power tool repaired before
use. Many accidents are caused by poorly main-
tained power tools.
f) Keep cutting tools sharp and clean. Prop-
erly maintained cutting tools with sharp cutting
edges are less likely to bind and are easier to
control.
g) Use the power tool, accessories and tool
bits etc. in accordance with these instruc-
tions, taking into account the working con-
ditions and the work to be performed. Use
of the power tool for operations different from
those intended could result in a hazardous situ-
ation.
5) Service
a) Have your power tool serviced by a quali-
fied repair person using only identical
replacement parts. This will ensure that the
safety of the power tool is maintained.
Machine-specific
Safety Warnings
Do not use the power tool for explosive mate-
rials (e. g., easily inflammable solvents).
Power tools produce sparks which could ignite
developing vapours.
In case the power tool should fall into the
material to be stirred, pull the plug immedi-
ately and have the power tool checked by an
after-sales service agent. Material that has pen-
etrated the power tool can cause damage and lead
to an electric shock.
Always use the auxiliary handle supplied with
the machine. Loss of control can cause personal
injury.
When working with the machine, always hold
it firmly with both hands and provide for a
secure stance. The power tool is guided more
secure with both hands.
Do not work materials containing asbestos.
Asbestos is considered carcinogenic.
Take protective measures when dust can
develop during working that is harmful to
one's health, combustible or explosive. Exam-
ple: Some dusts are regarded as carcinogenic.
Wear a dust mask and work with dust/chip extrac-
tion when connectable.
10 | English
Always wait until the machine has come to a
complete stop before placing it down. The tool
insert can jam and lead to loss of control over the
power tool.
Never use the machine with a damaged cable.
Do not touch the damaged cable and pull the
mains plug when the cable is damaged while
working. Damaged cables increase the risk of an
electric shock.
Connect machines that are used in the open
via a residual current device (RCD).

Functional Description

Read all safety warnings and all
instructions. Failure to follow the warn-
ings and instructions may result in electric
shock, fire and/or serious injury.
While reading the operating instructions, unfold the
graphics page for the machine and leave it open.

Intended Use

The machine is intended for mixing pulverised building
materials such as mortar, plaster, adhesives, as well as
solvent-free paint, varnish and similar substances.

Technical Data

Stirrer/Mixer
Article number
Rated power input
Output power
No-load speed
– 1st gear
– 2nd gear
Rated speed
– 1st gear
– 2nd gear
Rated torque (1st/2nd gear) Nm
Drive spindle dia.
Spindle collar dia.
Weight according to
EPTA-Procedure 01/2003
Protection class
The values given are valid for nominal voltages [U] of
230/240 V. For lower voltage and models for specific coun-
tries, these values can vary.
Please observe the article number on the type plate of your
machine. The trade names of the individual machines may
vary.
GRW 11 E
PROFESSIONAL
0 601 940 7..
W 1150
W 670
rpm 0 – 400
rpm 0 – 920
rpm 0 – 280
rpm 0 – 640
105/50
5
" /
8
mm 43
kg 4.2
/II
1 609 929 K96 • 19.1.07