Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Operation
Operation
Setting the Power:
The device hast wo power settings which are marked with + and – . To set the
power, set the lever (D) to either the + or the – symbol.
Use as Trigger Tacker (Fig. 1 – 3):
Press the device with the trigger / safety pin (E) on the spot at which you
intend to drive a staple or a nail and press the lever (B) until the device is
triggered with a snapping sound. You can secure the device by placing your
free hand on the hump (A).
Use as Hammer Tacker (Fig 4 – 6):
Hold the device in such a way that the trigger / safety pin (E) does not touch
any surface and cock it by pressing the lever (B). The lever must lock into
place with a audible click. Strike the spot in which you intend to drive a staple
or nail with the trigger / safety pin (E). The tacker is triggered upon impact.
Precisely Setting Staples and Nails (Fig 7 – 9):
Hold the device in such a way that the trigger / safety pin (E) does not touch
any surface and cock it by pressing the lever (B). The lever must lock into
place with a audible click. Carefully place the trigger on the spot into which you
intend to drive the staple or nail. Gently press down the device to depress the
trigger and drive in the staple or nail.
12
Werbung
Inhaltsverzeichnis
