Energy Saving; Software Upgrade; Factory Reset; Using A Chargepak - PURE ONE Classic Series II Bedienungsanleitung

Energy saving

ONE Classic is part of the PURE EcoPlus product family, designed and manufactured to minimise
power consumption when the unit is switched on and in standby. One way this low power
consumption is enabled is by not collecting and storing Intellitext messages when the unit is in
standby. Two options are available:
On (default) ONE Classic updates the Intellitext data when you tune to a station that broadcasts
Off
Note If you fi t the optional ChargePAK C6L or 6 x 'C' batteries (see below) the unit will switch
off when you press the Standby button and not enter standby, as long as the unit is not
connected to mains power.

Software upgrade

Software updates for your ONE Classic may be made available in the future. If you register your
product and include a valid e-mail address you will receive notifi cation of software updates
(register at www.pure.com/register). Available software updates are also listed at
http://support.pure.com.*
To upgrade your radio
1. Press and hold the Menu button for three seconds to access the maintenance menu.
2. Select 'Upgrade' and follow the instructions provided with the upgrade software*.

Factory reset

Resetting your radio removes all presets, clears the station list, any Listen Later programmes and
resets all options to their defaults.
To reset your radio
Select 'Factory reset' and push the dial to confi rm the reset.

Using a ChargePAK

PURE ChargePAK C6L is a rechargeable battery pack
which plugs into the socket in the radio's battery
compartment. Whenever your radio is connected
to a mains supply the ChargePAK will recharge and
the battery icon on screen will animate. When the
ChargePAK is fully charged the battery icon will
disappear.
To purchase a PURE ChargePAK C6L, contact your
nearest PURE dealer or visit the shop on our
website at www.pure.com.
Note ONE Classic can only be powered with a ChargePAK C6L or 6 x 'C' cell batteries. Do not
use any other ChargePAK model. Carefully follow the separate fi tting instructions that are
supplied with the ChargePAK.
*Requires a PC (not Mac) with internet access running Windows XP/Vista/7 and a suitable USB cable (not included).
12
Intellitext. Intellitext data is not collected in standby.
ONE Classic collects Intellitext data in standby from the last station viewed
Intellitext, which increases standby power consumption.
C, LR14, 1.5V
+ + +
+ + +
x6
size 'C', LR14