Back Panel Introductions - Vieta Home VH-HA050 Benutzerhandbuch

Back Panel Introductions
1. Line Out: For connection to an external amplifier
2. Input CD: For connection of CD player or optional equipment.
3. Input DVD: For connection of DVD player or optional equipment.
4. Input Tuner: For connection of Tuner or optional equipment
5. Input AUX: For connection of someone optional equipment
6. Input PHONO: For connection of a turntable with an MM phono cartridge
Note: Ground Screw above inputs must be connected meanwhile.
7. Speaker.A Left & Right: For connection to A pair of loudspeakers at 4-8 ohm.
8. Speaker.B Left & Right: For connection to B pair of loudspeakers at 4-8 ohm.
Note: When you want to connect the 2 pairs of Speaker. A&B simultaneously, the maximum impedance of
speakers must be 8 ohm or above.
9. AC Input: For connection of mains voltage.
Speaker Outputs Left and Right
To avoid damage to the amplifier, make sure it is NOT plugged into an AC outlet while connecting up or
disconnecting speaker wire to the speaker outputs. The amplifier has two pair of speaker outputs on the back
labeled Speaker Left and Speaker Right. Using a suitable speaker wire, connect the right speaker (of
Speaker A or B) to the Speaker Right connectors and the left speaker to theM Speaker Left (of Speaker A or B) .
Pay careful attention to match the positive (red) and negative (black) terminals on your speakers to the positive (red)
and negative (black) terminals on back of the amplifier.
23