Inhaltszusammenfassung für Doepfer Musikelektronik GmbH A-100
Seite 1
A-100 Analog Modular System A-100 Miniature Case A-100MC V2 A-100 Mini-Netzteil/ A-100 Miniature Supply A-100MNT Version 2 (12-15V AC) A-100 Mini-Netzteil/ A-100 Miniature Supply A-100MBP Bedienungshinweise User's Guide doepfer Musikelektronik Gmbh...
Seite 2
A-100MC besteht aus einem kleinen Gehäuse mit 32TE Breite und eingebautem A- 100MNT oder A-100MBP. Daher gibt es eine gemeinsame Anleitung für die Produkte. Die Stromversorgung liefert die zum Betrieb der Module des Systems A-100 erforderlichen Versorgungsspannungen +12 V und -12 V sowie eine zusätzliche Versorgungsspannung von +5 V, die einige ältere Module benötigen.
Seite 3
400mA). Das Netzteil kann auch eine höhere Stromangabe aufweisen (z.B. 500mA oder 800mA). (2) Bus-Steckplätze Diese vier 16-poligen Stiftleisten dienen dem Anschluss der A-100-Module. Gehen Sie folgendermaßen beim Einbau der Module vor: • Ziehen Sie das Steckernetzteil von der Buchse (1) ab.
• Achten Sie unbedingt darauf, dass sich die farbige Ader des Kabels unten befindet und dass die Buchse bündig (nicht seitlich oder nach oben/unten versetzt) auf den Stiften sitzt. Die farbige Ader des Kabels muss dort sitzen, wo sich auf der Busplatine der Aufdruck "-12V"...
Seite 5
The A-100MC is a small case with 32 HP width and a built in A-100MNT or A-100MBP. The idea for both units is that then you can use only a few special A-100 modules - for instance a miniature synthesizer or some filters or effect modules only as free-standing pieces of equipment, which can easily be integrated with your other instruments or recording equipment.
Seite 6
AC, min. 400mA, more mA is no problem) (2) Bus connectors These are the pin headers which are used to connect the A-100 modules. Up to four modules can be connected: Please calculate the total current requirement of the modules that have to be •...
Seite 7
with the "-12V" printing on the bus board next to the pin header. Check also very carefully that it is pushed fully home, not at a slight angle and • not vertically or horizontally displaced. Failure to check this may result in the module’ s instant destruction as soon as the •...