Selecting Inputs - Naim Audio UnitiQute 2 Kurzanleitung

2.4 If a subwoofer or external power amplifier is to be used, the UnitiQute 2 preamp output must be configured. Enter Setup
Mode and select Speakers followed by Type. Select Large if no subwoofer or external power amplifier is to be used. Select
Small if a subwoofer or external power amplifier is to be used in combination with restricted bandwidth speakers connected to
the UnitiQute 2 speaker outputs. Select None if no speakers are to be connected to the UnitiQute 2 speaker outputs.
2.5 UnitiQute 2 is configured when shipped to connect to wired TCP/IP home networks automatically. However, if your UnitiQute
2 has been previously used and its network configuration altered, or your router requires nonstandard settings, it may not be
able to do so. Refer to the Reference Manual if this appears to be the case.
If a wireless network connection is to be used, your UnitiQute 2 will require configuration to join the network. Enter Setup
Mode and select the Network Settings option to configure the UnitiQute 2 wireless settings.
2.6 To adjust the UnitiQute 2 volume, either touch the front panel logo or use the handset volume keys.
3.
3.1 UnitiQute 2 inputs can be selected using the handset navigation (56) keys or one of the handset input selection keys.
3.2 Pressing one of the handset input selection keys either selects a single input or scrolls through a group of inputs. For example,
pressing the radio key scrolls through a group comprising the FM, DAB and iRadio inputs. To modify the key assignments enter
Setup Mode and select Handset Buttons.
3.3 When UnitiQute 2 is connected to a network with high speed internet access it will automatically download a list of available
internet radio stations. When the iRadio input is subsequently selected, a menu will be displayed that lists all the available
stations. Use the handset navigation (563) and ok/list keys to browse the list and select stations.
®
3.4 UnitiQute 2 can play Spotify streams via the Spotify
®
in receipt of a Spotify stream, the UnitiQute 2 will automatically select its Spotify
established, it can be controlled using the Spotify
3.5 UnitiQute 2 can play audio streams over a Bluetooth wireless connection from appropriately equipped playback devices.
UnitiQute 2 is configured by default to require "pairing" with a Bluetooth streaming device before it can play a Bluetooth audio
stream. To pair a UnitiQute 2 with a Bluetooth device select the Bluetooth input and press the handset play/pause key
( ). The UnitiQute 2 will become available for pairing in the Bluetooth device setup menu. Once successfully paired with the
Bluetooth device, the UnitiQute 2 will be available to the audio apps on the device. UnitiQute 2 will switch automatically to its
Bluetooth input when in receipt of a Bluetooth stream. The UnitiQute 2 Bluetooth input setup menu offers further Bluetooth
configuration options including "open" pairing.
3.6 UnitiQute 2 can play TIDAL streams via the Naim App. When in receipt of a TIDAL stream the UnitiQute 2 will automatically
select its TIDAL input. Playback can be controlled using the the Naim app, the handset or the front panel controls. TIDAL
streaming requires a TIDAL subscription.

Selecting Inputs

®
Connect facility incorporated in some Spotify
®
input. Once Spotify
®
app, the Naim app or the UnitiQute 2 handset or front panel controls.
Speakers
4Amp Used: Internal Only
Max. Volume:
Balance:
Network Settings
4Name:
Wireless:
Status: Not Connected
DHCP:
Note 3: The Naim app, available from the iTunes App Store and Google
Play Store, enables wireless touch screen control from iOS and Android
devices.
Internet Radio
Added stations
Naim's Choice
4Location
®
player apps. When
Genre
®
playback is
Bluetooth
4Enabled:
Name:
Input Trim:
Discovery:
UnitiQute 2 • English
1/3
100
0
1/5
Lite-XXXX
Not Used
Yes
3/8
Note 3.4: The default UnitiQute 2 network
name (Lite-XXXX) incorporates the last four
characters of the unit's MAC address. The
full MAC address is listed in the Network
Settings menu.
1/5
Yes
Note 3.5: The default UnitiQute 2 Bluetooth
Bluetooth
name (Lite BT XXXX) incorporates the last
0
four characters of the unit's MAC address.
Lite BT XX..