Cleaning; Possible Cause; Troubleshooting; Storage - Proficook PC-EWB 1007 Bedienungsanleitung, Garantie

Cleaning

WARNING:
• Switch off the device before cleaning and
disconnect the mains plug.
• Never immerse the appliance in water to clean
it. Doing so may lead to electric shock or fire.
CAUTION:
• Do not use wire brushes or other abrasive
implements.
• Do not use harsh or abrasive cleaning agents.
• Do not use chemicals, acids, petrol or oil
products.

NOTE:
• For hygienic reasons exchange the water in
the tank after 24 hours.
• Remove the ice cube tray after use. If the
water tank remains open no mould or bacteria
can form.
Ice Cube Container (6)
Remove the ice cube container and clean it with a
mild detergent under running warm water.
Problem
No function.
Compressor noisy.
Indicator lamp flashes. Water refill.
Ice cubes are too large and
stick together.
The symbol flashes.
42
Casing and Interior
• Clean casing and interior with a damp cloth.
• Use a diluted solution of vinegar and water.
Drain Residual Water (4)
Drain the residual water if the appliance is not in
use for a longer period of time. Rest the appliance
on a table edge. Hold a bowl under the residual
water drain valve.
• Turn the residual water drain valve anti-clock-
• Close the residual water drain valve after the
• We recommend that you keep the appliance in
• Always keep the appliance out of the reach of

Troubleshooting

Possible Cause

No power supply.
The appliance is faulty.
Mains power supply too low.
Water temperature or ambient
temperature too low.
The water tray is blocked by
oversized ice cubes.
wise to drain off the rest of the water.
residual water has been drained.

Storage

the original packaging if you do not intend using
it for long periods.
children in a dry, well-ventilated place.
Solution
Use the on/off switch (4) to turn the appli-
ance on.
Test the socket with another appliance.
Plug in the mains plug correctly.
Check the main circuit breaker.
Contact our service center or a specialist.
Turn the appliance off and check the
mains power supply.
Refill water " Making ice cubes ".
Stop ice cube production.
Drain off some water and refill with luke-
warm water (max. 35°C).
Use the on/off switch (4) to turn off the
appliance. Wait until the ice cubes are
loosened. Switch the appliance on again.
Use ON to restart.