iCES ICH-8700 Bedienungsanleitung Seite 24

Function and Feature

The cooker hood is made of high quality materials with streamlined design accordingly to
technical and physical engineering theory, high end and luxury with age aesthetic feeling,
also there are kinds of styles for your option to perfect your kitchen.

Equipped with a large power low noise electric motor and centrifugal leaf, it produces strong
suction, low noise, non stick grease filter and easy to clean.

With the isolated low voltage circuit board control, 12vAC input, the lights are more
concentrative and use is much safer.

The grease filter is easy to remove and clean, and only wipe lightly for the motor and other
interior parts.

Special wind tunnel construction and oil collector design, avoiding redundant grease left in
the flue.
Installation
1. The cooker hood should be placed at a distance of
65-75cm (26-30inch) from the cooking surface for the
best effect. See Pic 1.
2. Install the hook on a suitable place once the installation
height is fixed, and keep it in line. The fixed position of
the inside chimney bracket is the place of chimney.
3. Fix the extensible tube on the hood, and put the cooker hood
on the hook. See Pic 3.
4.Put the glass according to the lead direction and way on the cooker hood, and then use the
screws to fix the glass, also lead the extensible pipe outside of the room, meanwhile adjust the
height of the inside chimney to the position of the inside chimney bracket and fix on it by screw ,
here should be sure the inside chimney can be flexed freely. See Pic 4.
5.Install the chimney, and adjust the height of the inside chimney to the position of the
inside chimney bracket, then fix on it by screw. After adjusting the position ,fix the body with
safty screw. See Pic 5.
Note: The two safty vents are positioned on the back casing, with diameter of 6mm
2