Team DAI 8 Gebrauchsanleitung Seite 9

Fax +32 2 359 95 50

FILLING THE WATER TANK
Only use demineralised water. If you want to use the steam/dry dial fill the water tank as
follows:
1) Unplug the iron from the outlet to let it cool down and set it horizontally on a
stable level surface.
2) Turn the temperature dial to "MIN" and variable steam/dry dial to the
3) Using a measuring cup, fill the tank through the fill opening. Do not exceed the
MAX mark! NOTE : never fill with anything but water.
TEMPERATURE SETTINGS
 You can choose the temperature setting in function with the cloth to iron.
 In order to turn the iron on, please turn the temperature knob clockwise into the required
position.
DRY PRESSING
 Turn on the iron.
 Set temperature dial for the desired fabric.
NOTE: be sure to check the garment label for fibre content and set for the fabric requiring the
lowest temperature.
 Turn the variable steam/dry dial on position
 Set iron on heel rest and wait until temperature indicator light goes out.
STEAM PRESSING
Kind of textile
Synthetic (e.g. acetate,
acrylic, viscose,
Polyamide, polyester, ...)
Silk
Wool
Cotton
Linen
CLEANING
 Fill the water tank (variable steam/dry dial on position
Copies of the I/B. Please reproduce them without any
changes except under special instruction from Team
International BELGIUM. The pages must be reproduced
and folded in order to obtain a booklet A5 (+/- 148.5 mm
width x 210 mm height). When folding, make sure you
keep the good numbering when you turn the pages of
the I/B. Don‟t change the page numbering. Keep the
language integrity.
.
Temperature dial Steam ironing
MIN









MAX



MAX
9
Assembly page 9/36
setting.
).
TEAM DAI 8 - 090225