Herunterladen Inhalt Inhalt Diese Seite drucken

How To Use - Duronic SI2 Gebrauchsanleitung

Travel steam iron
Vorschau ausblenden Andere Handbücher für SI2:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

How To Use

1.
a) Set the temperature dial to "Min"position
b) Place the iron horizontal.
c) Fill the iron with water
Notice:
1. Do not allow the water to overflow
2. Please use pure water or distilled water (if the tap water in your
area is very hard)
2.
a) Plug the AC cord into electrical outlet & connect to power supply.
b) Adjust the temperature regulator according to the cloth's ironing
temperature.
Notice: When using steam burst, please turn the temperature dial to max
position.
3.
a) Preheat the iron until the indicator light goes out and it has reached
the set temperature.
b) Press the steam button to release steam
It can last 5-7 timesNotice: 1. Burst steam mainly for fabrics of thick
materials or with stubborn wrinkles, and clean the steam vents at the
same time.
2. Pump the jet of steam button several times before using for the first
time at each ironing session.
Notice: 1. Burst steam mainly for fabrics of thick materials or with stubborn
creases. It will also clean the steam vents at the same time.
2. Pump the jet of steam button several times before using for the first
time bevore each ironing session.
4.
Unplug the plug when the volume of water is low and refill the iron
according to the step 1
5.
a) Unplug when not in use
b) Make sure all water is removed after use.
6.
Wait for the iron to be completely cool before it is stored away.
8
Fabric And Ironing Recommendations
1. For heat-sensitive fabric, cover your clothing with a piece of cotton
fabric to avoid damage.
2. Iron clothes with lower heat resistance first.
3. Use an ironing board – using another type of board might damage the
clothing, the board or the iron.
4. If the iron is too hot, it might leave yellow traces on your clothing. If
it happens, humidify the stains with oxidized water, rinse and dry.
5. Black or dark clothing should be ironed from the inside out to avoid
leaving traces.
Maintenance
Remove the plug, wait until iron cool completely.
1. Wipe off iron soleplate and other parts with a damp and soft cloth
2. For serious stains, use neutral detergent.
9

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis