i-tec MYSAFESECRET Gebrauchsanweisung Seite 6

i-tec MySafe USB 3.0 Secret
3) Enter the old code and press "#". The red and the green LED will
remain ON.
4) Enter the new code and press "#". The blue LED will blink 3
times and then go OFF. The red and the green LED will remain
ON.
5) Enter the new code again and press "#". The blue LED will blink
3 times and then remain ON.
6) When changing the code the data will be preserved and it is not
necessary to format the HDD.
INCLUDED IN THE PACKAGING
External case for a 2.5" HDD
Ÿ
USB 3.0 cable (50 cm)
Ÿ
User manual
Ÿ
FAQ
Question: The case is not detected in the OS.
Answer: Connect the device to another USB port.
Question: HDD is not visible in the system.
Answer: Make sure the HDD is formatted.
Question: After connecting to the Express Card the case is not
sufficiently energized (HDD not rotating, not detected in the OS).
Answer: Connect an additional power supply for the Express
Card.
Question: Can I access the data if I forget the code.
Answer: No.
Question: Can I keep using the HDD if I forget the code.
Answer: Yes, but the data will be lost. In this case you need to
make the settings of the case again.
Question: How can I access the data if the case is damaged but
the HDD remains functional.
Answer: It is necessary to replace the case for a new one of the
same type from the same manufacturer. The code will remain
preserved.
Question: Can use the HDD after removing it in a normal case as
well.
Answer: Yes, but the data will be lost. After mounting to a normal
case, the HDD is unreadable and needs to be formatted first.
EN
05