Maintenance and service
•
Prior to all work, pull out the electric power plug.
•
Clean the plastic parts with a damp cloth. Do not use any cleaning agents, solvents
or sharp objects.
•
Remove sediment dust regularly from the ventilation openings and moving parts
with a soft brush or tweezers.
•
After working for a long period dismantle the bar and chain and clean them with a
brush or tweezers.
•
Remove the stuck dirt and oil from the chain wheel and the bar fixing with a brush
or tweezers.
•
Clean the oil nozzle with a cloth.
•
Remove oil from the tank if the chainsaw will not be used for an extended period.
Clean the chain and bar in an oil bath and keep in oil paper.
BDA_E-FLOR_HEA_710.indd 25
25
07.11.16 13:18