Velleman Modules VM101 Benutzerhandbuch Seite 6

Connection
6
N L
AC Power
IMPORTANT !
All connections must be performed using solid-core
wire of the appropriate rating.
Installation must be done according to local
regulations and standards. If any doubt, consult a
licensed technician.
This module is not suited for portable applications. The
unit must be wall-mounted or clicked on a DIN-rail.
The remote pushbuttons always carry a dangerous
voltage and must be rated for the applied AC voltage.
Never connect a transformer to the output while the
'synchronous motor speed control'-mode (mode 13) is
active.
Most electronic transformer are not suited for dimming.
Consult your distributor.