Inhaltsverzeichnis
Werbung
Allgemeiner Teil / General Section
CD MODE
________________________________________
Selecting a different track
1
During playback, keep pressing
the number of the desired track appears in the display.
– Playback of the selected track starts automatically.
Repeating the current track
1
Press »REPEAT« during playback.
– Both LEDs light up and the track is repeated.
0 2
2
To end this function, press
Repeating the whole CD
During playback, press »REPEAT« twice.
1
– Both LEDs light up and the CD is repeated.
To end this function, press
2
Note:
With the RR 670 CD, the current track and the whole CD can also be
repeated using the remote control. To do this, use the »MODE« button.
Searching for a passage within a track
During playback, press
1
down until you find the desired passage.
– When you let go of the
playback will begin at that point.
Note:
During the search the volume is reduced.
Random track playback
(RR 670 CD with remote control only)
1
Press »MODE« on the remote control three times during playback.
– The display switches between the track number and an alternating
I 2
symbol. The tracks on the CD are played back in random order.
2
To end the function press »
Alternatively, press »MODE« on the remote control. In this case the
tracks will be played back in the original order.
r
r
Note:
You cannot select this function if the tracks are being played
back in a set sequence from the memory.
CD MODE
________________________________________
Adding tracks
Keep pressing » PROG.« until the display shows the first free memory
1
position.
Add the new track as described in "Selecting and storing tracks".
2
– The new track is stored after the current sequence.
Replacing tracks
1
Keep pressing » PROG.« until the display shows the number of the
track which you want to replace.
2
Select and store the new track as described in "Selecting and storing
tracks".
Deleting the track memory
1
Press » PROG.« when the CD is in the STOP position.
– The indicator LED in the » PROG.« button flashes.
2
Press »
« to delete the track memory.
7
Note:
The track memory is also deleted if
– The CD compartment is opened
– The Radio Recorder is switched off using the
RADIO« switch or the power supply is interrupted.
1 - 6
»F-SKIPs
s« or »R-SKIP§« until
»REPEAT
« twice. The left LED goes out.
»REPEAT
« again. The left LED goes out.
»F-SKIP s
s« or
»R-SKIP
§« and hold it
»F-SKIP s
s« or
»R-SKIP
§« button,
I
STOP
«, and playback is halted.
»CD TAPE/OFF
CD MODE
________________________________________
Creating a track memory
This function enables you to store up to 21 tracks on the current CD in a cer-
tain order and then play them back in that sequence. The same track may
be stored more than once.
Selecting and storing tracks
Insert a CD in the CD compartment.
1
Note:
The function switch must be set to »CD«. The Radio Recorder must be in
0 I
the STOP position.
Press » PROG.«.
2
– Display: »
«, the indicator LED in the » PROG.« button flashes.
0 1
0 6
Select the desired track using the
3
((
))
buttons.
– The selected track number flashes in the display, and the indicator LED
in the » PROG.« button flashes.
Press the » PROG.« button to store the track.
4
0 2
– Display: »
«, the indicator LED in the » PROG.« button flashes.
0 2
To store more tracks repeat steps
5
– If you try to store more than 21 tracks, the track memory is deleted.
Playing back the track memory
1
Press » PROG.« when the CD is in the STOP position.
– The indicator LED in the » PROG.« button flashes.
2
To start playback of the track memory press »
– The playback begins with the first track.
3
To stop playback of the track memory press »
Checking the track memory
1
Press » PROG.« when the CD is in the STOP position.
– The indicator LED in the » PROG.« button flashes.
2
To start playback of the track memory press »
3
Select the track memory by pressing
– The track numbers appear one after the other in the display and the
introductions are played.
TAPE MODE
_____________________________________
Recording from the radio
CLOSE
TAPE DIRECTION
Put a cassette with the protection tabs intact in the cassette com-
1
partment, and press the »
position on the tape.
ULTRA BASS SYSTEM
8
8
3
3
4
4
!
!
Set the
»CD TAPE/OFF
2
the desired radio station.
3
Press
»G
« to start recording.
– The »
« button is automatically engaged.
CD
– The device automatically stops recording at the end of the cassette.
TAPE/OFF
RADIO
To interrupt the recording press
4
Resume recording by pressing
5
To break off recording, press »
Recording from a CD
1
Put a cassette with the protection tabs intact in the cassette com-
partment, and press the »
position on the tape.
2
Set the
»CD TAPE/OFF
3
To start recording in the middle of a track, start the CD playback as
usual.
4
As soon as you reach the desired passage, press »
II« and then
»G
CD Synchro recording
1
Put a cassette with the protection tabs intact in the cassette com-
ON
PROG.
partment, and press the »
position on the tape.
TRACK
CLOSE
TAPE DIRECTION
2
Set the
»CD TAPE/OFF
3
Press
»G
« to start recording.
– The »
« button engages automatically and the CD playback is star-
ted automatically from the beginning of the CD or the beginning of
the stored music program, if you first pressed » PROG.«.
– The device automatically stops recording at the end of the cassette.
Fast forward/rewinding the cassette
1
From the STOP position, press »
– »
« fast forwards to the end of the tape, »
beginning of the tape.
I/
2
Press »
« when you reach the desired position on the tape.
RR 640 CD / RR 670 CD
»F-SKIP s
s« and
»R-SKIP
§«
and 4.
3
PLAY/PAUSE
II
«.
I
STOP
«.
PLAY/PAUSE
«.
II
»F-SKIP s
s« or
»R-SKIP
§«.
« and »
« buttons to find the right
RADIO« switch to » RADIO« and tune in to
»II
«.
»II
«.
I/
«.
« and »
« buttons to find the right
RADIO« switch to » CD«.
PLAY/PAUSE
« on the tape unit to start the recording.
« and »
« buttons to find the right
RADIO« switch to » CD«.
« or »
«.
« rewinds to the
GRUNDIG Service
Werbung
Inhaltsverzeichnis
