Preparations; Attaching Accessories - Beem Z6.001 Bedienungsanleitung

EN
Attaching
Insert the handle into the extension.
‹
Insert the fixing screw into the hole in
‹
the handle and turn the screw tightly
with a suitable Phillips screwdriver
(see image A1).
Attach the extension to the main body
‹
Insert the fixing screw into the hole in
‹
the extension and turn the screw tight-
ly with a suitable Phillips screwdriver
(see image A2).
Align the guide on the main body with
‹
the recess in the floor brush and push
the lower end of the main body into
the floor brush until it snaps in.
To remove the floor brush, press the
‹
release lever on the back of the floor
brush and pull the floor brush out of
the main body (see image B).

Preparations

Filling the water tank
Press both tank release buttons (12)
‹
und remove the water tank (see im-
age C1).
Turn the tank cover (5) 45° clockwise
‹
to open it.
Fill with a maximum of 400 ml of water.
‹
Close the water tank by turning the
‹
cap 45 ° clockwise (see image C2).
Push the water tank onto the appli-
‹
ance until it audibly snaps in.
BEEM - Elements of Lifestyle
Miracle Mop 9 in 1
NOTE
► A metal ball is situated in the water
tank that is used as a weight for the
suction hose. Make sure that this
metal ball is always covered with
water so that steam can flow evenly
(see image C3).
Hand-held steam cleaner
Inserting
Remove all attached nozzles and
‹
loosen the carrying strap.
Insert the lower end of the hand-held
‹
steam cleaner (11) into the main body
(13) and subsequently push the upper
end until it audibly snaps in.
Removing (see image D1)
Press the release lever (7) and remove
‹
the hand-held steam cleaner (11) from
the main body (13).
To simplify cleaning with the hand-
‹
held steam cleaner, you can fix the
carrying strap (20) to the handle of the
hand-held steam cleaner and the ex-
tension hose (see image D2).

Attaching accessories

Attaching/removing the adapter
Remove the hand-held steam cleaner
‹
(11) from the main body (13).
Align the guide on the hand-held
‹
steam cleaner and the recess on the
adapter with each other.
Push the adapter into the hand-held
‹
steam cleaner until it snaps in (in the
same way as the extension hose as il-
lustrated in image F1).
To remove the adapter, press the re-
‹
lease lever on the bottom of the adapt-
er and pull the adapter from the hand-
held steam cleaner (see image F2).
19