Namiba Terra Biostat 1000 Installations- Und Gebrauchsanweisung Seite 9

4. Operations
Control once again that by the installation the device or the net management didn't
be damaged. Pay attention also to the fact that the feeler cable was snapped not
sharply, because thereby the function can be affected.
Display
: Light level symbol
: day/night difference symbol
: alarm symbol
: heating symbol
: cooling symbol
: Celsius symbol
: Fahrenheit symbol
Operating instructions
Basic functions
- Digital thermostat for temperature measurement and control.
- large display for clearer information indicates.
- Day/night difference controlled by light sensor with adjustable light level.
- Alarm function with both LED and LCD.
- Heating/Cooling working status will be indicated by both LED and
display.
- Memory function to avoid lost of former settings.
- for safety reason, when you enter programming mode, slot will be
disconnected.
- The Thermostat is a device for in-door using only
Instraction
1.Connect the device to mains supplier(plug in), display shows all symbols around 2
seconds, then indicate measured current temperature value.
2.Exchange from °C to °F
Press button and hold it, then press
3.Program the temperature
press or buttons to adjust the temperature value
you want.
Select range:
10-50°C or 50-122°F, each press is 1°C or 1°F
button, you can change from °C to °F
(eg. 28°C)