Playing Cds/Mp3; Programmed Playback; Bluetooth Streaming/Aux - AEG SR 4348 BT Bedienungsanleitung, Garantie

English
26
• The display (ST) is shown in the LCD display during an
optimal reception of the station. Reposition the antenna
in case of bad radio reception. Should the radio recep-
tion be disturbed by static, you can reset the replay to
mono operation with the switch (4).
• Start automatic station search with the button
Pause (13)/Station search.
Saving radio stations manually
• Use the TU-/TU+ buttons (18/19) to search for a radio
station to be stored.
• Press the button (12) once.
• Use the / buttons (14/17) to select a preset position.
• Press the button to store the station.
Use the or the button to select a saved preset.

Playing CDs/MP3

Replay of a CD
To play back an audio CD, please proceed as follows:
• Turn the device on.
• Slide the operating mode switch (3) to the "CD" position.
• Open the CD tray (9) by slightly pressing on the right front
(11). (OPEN/CLOSE)
• Insert a CD into the device with the label on top. Ensure
that the CD locks in on the centring taper.
• Close the CD tray (9) by pressing it shut until it locks into
place.
When the CD is inserted, the total number of the CD titles
will be displayed. The display will also show you whether it
pertains to an audio CD or an MP3 CD. If you press the
button (replay/pause) (13), the replay will start.
• Press the stop button (12).
• Open the CD tray (11) by slightly pressing on the front
right (11). (OPEN/CLOSE)
• Close the CD tray.
NOTE:
If you insert a CD upside down or if it is not readable,
then the display will read "no".
The replay of self-produced CD's can not be guaranteed
due to different burn programs and storage media.
Description of the CD buttons
button (Replay/Pause) (13)
By pressing this button during the replay you may stop the
replay. If you press the button again, the replay will continue.
/ buttons (Search run forward/backwards) (14/17)
With these buttons you can affect the music replay in the CD/
USB mode.
You can use the button to skip a title and to change to the
next title.To do this, please proceed as follows:
• Press the button briefly to skip to the next title.
• By pressing down and holding the button, the music
search is activated. The title is not changed but is wound
forward in fast forward mode.
With the button you wil proceed as follows:
Play/
• By pressing it 1x, it will change to the previous title.
• Pressing it 1x and holding it down will activate the music
search run backwards.
REPEAT (19) button
This button enables you to set different options of music
replay. To do this, procced as follows:
• Pressing 1x repeats the current title until the function is
deactivated. "ONE" will be shown in the display.
• Pressing 2x will replay the entire CD until the function is
deactivated. "ALL" will be shown in the display.
If the button is pressed again, the function is deactivated
again. The replay will run in the normal mode.

Programmed playback

Allows the programming of any desired order of selections.
To program the order of selections, please proceed as fol-
lows:
• Insert a music medium (Audio – CD / MP3 - CD/ USB
stick)
• Press the PRG (18) button. "P01" will appear in the dis-
play.
• Now select the requested title with the / buttons
(14/17).
• Press the PRG (18) button again. "P02" will appear in the
display.
• Select another title.
• Proceed the same way with the further programming.
• You will start the playback with the
To delete the programming, press the button (12).

Bluetooth Streaming/AUX

To playback music through the Bluetooth or AUX, please
proceed as follows:
• Slide the operating mode switch (3) to the "Bluetooth/
AUX" position.
• Pair your music output device with Bluetooth with the
device. The Bluetooth password of the device is "0000".
You may alternately connect the music output source by
using a 3.5 mm jstereo jack plug with the AUX terminal (11)
of the device.
• Select the desired music titles.
• Start the playback.
NOTE:
• Before you start the replay, ensure a moderate output
volume of the music source and of the device. Adjust
the volume later on.
button (13).