Heinner VBP001 Anleitung Seite 5

Technical data
Rated Power: 500W
Voltage: 230V
Frequency: 50Hz
No Load Speed: 0-3000rpm
Maximum Chuck Capacity: 13mm Keyless Chuck
Guaranteed sound power level LwA: 95 dB(A)
Tool description
1 – Rotational direction switch
2 – On/Off switch
3 – Variable speed
4 – Lock button
5 – Drilling/impact drilling selector
Rotational direction switch
6 – Drilling depth stop
7 – Keyless chuck
8 – Auxiliary handle
Before starting the equipment
Check the tool each time before you use it. If any
flaw is visible, take the tool to qualified personnel
to fix it. Do not open the tool.
During the functioning, the level of
noise can reach 95dB - wear ear
protection!
The materials you are working with
can produce chips or dust – wear
safety goggles and use a breathing
apparatus!
Wear good quality, strong gloves!
Operation
Check that the voltage is the one indicated in the
specifications of the product (tools with
230V or 240V can also be used with 220V).
The tool is equipped with an adjustable depth
indicator which can be used to set the needed
depth of the hole.
The drilling/impact drilling selector can be set to:
- drill – for drilling in wood and metal;
- impact drill – for stone and masonry.
Make sure that the tool has come to a full stop
before changing the drill mode.
On the on/off switch you can find the variable
speed dial which controls the speed of the tool.
If continuous operation is required, press the lock
ON button whilst pressing the trigger switch.
The direction of rotation can only be changed
while the tool is stopped. Rotation to the left is
advisable when the drill gets stuck or if you want
to unscrew.
After turning off the tool, please make sure that
the motor and the mobile components have
stopped completely.
Cleaning and maintenance
Keep the case clean. Wipe the tool with clean
cloth. Make sure no liquid gets inside the tool and
that the cooling vents are not blocked. We
recommend cleaning the tool after each use.
RECYCLING
Electrical and electronic equipment waste (WEEE)
might contain dangerous materials which can have
a negative impact on the environment and human
health if not collected separately.
This item is in conformity with the European
Directive EU WEEE (2012/19/EU) and is marked
with an electronic and electrical waste logo
graphically represented in the image below.
This icon shows that WEEE should not be
collected with household waste but
separately.
We recommend you to consider the following:
- Materials and components used when
manufacturing this item are high quality materials
which can be reused and recycled;
- Do not throw away the item with household
waste at the end of life;
- Take the item to a collecting point where it
will be collected for free;
- Please contact the local authorities for
details on the collecting centers.
IMPACT DRILL
4