Werbung
Quicklinks
Tenovis GmbH & Co KG
Kleyerstr. 94
D-60326 Frankfurt
Info-Service in Deutschland
Zum Nulltarif
Telefon: 0800-2661000
Telefax: 0800-2661219
http://www.tenovis.com
e-mail: info.service@tenovis.com
Änderungen vorbehalten
Wir entwickeln Vorsprung
HSG-BASISMODUL
DECT
Kurzanleitung
Quick Start Guide
Guide Express
Werbung
Inhaltszusammenfassung für Tenovis HSG-BASISMODUL DECT
- Seite 1 Wir entwickeln Vorsprung HSG-BASISMODUL DECT Kurzanleitung Quick Start Guide Guide Express Tenovis GmbH & Co KG Kleyerstr. 94 D-60326 Frankfurt Info-Service in Deutschland Zum Nulltarif Telefon: 0800-2661000 Telefax: 0800-2661219 http://www.tenovis.com e-mail: info.service@tenovis.com Änderungen vorbehalten...
- Seite 2 HSG-Basismodul DECT User Guide. The HSG-Basismodul DECT is primarily intended for use with the AEI interface of your telephone. Control of answering and ending calls using the remote pack is only possible when the HSG-Basismodul DECT is connected to the AEI interface.
- Seite 3 AEI port of your telephone. Connect the two cables coming from the AEI/DECT Adapter to the telephone and accessory port on the base unit of the HSG-Basismodul DECT. The remaining AEI/DECT Adapter cable should be connected to the AEI port of your telephone.
-
Seite 4: Headset Anschliessen
The HSG21, HSG22 and HSG23 headsets are connected via the Quick Important: respectez les distances de séparation minimales. Un placement Disconnect conversion cable to the remote pack of the HSG-Basismodul DECT. incorrect peut entraîner des problèmes d'interférences et de bruits parasites durant la communication. - Seite 5 Important: If your telephone has a receive volume control ensure it is set no problems may occur if this is incorrectly set. For all Tenovis terminals of the higher than mid-range - too high a setting could cause audio problems.
- Seite 6 Adjust the Listen Volume (how others sound to you) to a comfortable level. The speak level is factory set to match the T1 and T3 series of Tenovis. Should Important: Too high a Listen Volume can cause audio problems. Please...
- Seite 7 The setting will autosave 10 seconds after the last key press and will not require any further adjustment. The HSG-Basismodul DECT allows you to choose either standard range (switch position I – factory default) or long range (switch position II) operation which increases the maximum operating distance between the remote pack Appuyez deux fois sur la touche Mode ( en mode micro-casque).