Cleaning And Maintenance; Technical Specifications - Dimavery MPS-730 Bedienungsanleitung

3. If your MPS-730 provides power to some effects, but fails to power others, follow this procedure to trace
the trouble: A. First, check the polarity, voltage and plug size of the effect in question, and be sure they're
compatible with the MPS-730. B. Second, swap the power cord with another cord that is successfully
powering another effects box. This should rule out whether the cord is faulty. C. Plug the power cord into
different outlets on the MPS-730 to rule out a faulty output jack. If you've performed steps A, B & C, and your
effect still won't turn on, the problem is in the effect itself. Be sure you have followed all manufacturer
recommendations for set-up (i.e., are the instrument and amplifier cords plugged securely into the jacks?)
Test the effect with battery power to see if it functions at all. If it operates with battery power but not with
external power, the effect's power input jack may be faulty.

CLEANING AND MAINTENANCE

We recommend a frequent cleaning of the device. Please use a soft lint-free and moistened cloth. Never use
alcohol or solvents!
There are no serviceable parts inside the device. Maintenance and service operations are only to be carried
out by authorized dealers.
Should you need any spare parts, please use genuine parts.
Should you have further questions, please contact your dealer.

TECHNICAL SPECIFICATIONS

Power supply:
Dimensions (LxWxH):
Weight:
Please note: Every information is subject to change without prior notice. 23.04.2009 ©
DANGER TO LIFE!
Disconnect from mains before starting maintenance operation!
100 to 240 V 50/60 Hz ~
via supplied 18 W / 18 V DC @ 1 A regulated
115 x 75 x 40 mm
750 g
10/10 00046359.DOC