4. Der Computer wird neu gestartet, und die Installation vom Windows-XP-Betriebssystem be-
ginnt.
Windows XP Professional Setup
Welcome to Setup.
This portion of the Setup program prepares Microsoft(R)
Windows(R) XP to run on your computer.
● To set up Windows XP now, press ENTER.
● To repair a Windows XP installation using
Recovery Console, press R.
● To quit Setup without installing Windows XP, press F3.
ENTER=Continue R=Repair F3=Quit
5. Drücken Sie <ENTER> zum Fortfahren.
6. Drücken Sie <F8>, um den Lizenzvertrag zu akzeptieren und die Installation fortzusetzen.
7. Windows wird die Festplatten-Partitionen (160 GB, zum Beispiel) von Ihrem System anzeigen.
Wenn noch andere Systeme (wie Linux) vorinstalliert wurden, drücken Sie die Taste [D], um
sie zu löschen. Wenn alle Partitionen gelöscht waren, wird Setup die größte Größe Ihrer Fest-
platte anzeigen wie im Schritt 8 dargestellt.
Windows XP Professional Setup
The following list shows the existing partitions and
unpartitioned space on this computer.
Use the UP ad DOWN ARROW keys to select an item in the list.
● To set up on the selected item, press ENTER.
● To create a partition in the unpartitioned space, press C.
● To delete the selected partitions, press D.
152626 MB Disk 0 at Id 0 on bus 0 on atapi [MBR]
G: Partition2 [Unknown]
Unknown Disk
<There is no disk in this drive.>
Unknown Disk
<There is no disk in this drive.>
ENTER=Install C=Create Partition F3=Quit
F: Partition1 [Unknown]
150868 MB < 150868 MB free>
1757 MB <1757 MB free>
12