Viewing Results On A Personal Computer; Caring For Your Meter And Test Strips; Cleaning; Storage - Monometer voice Gebrauchsanleitung

Viewing Results on a Personal Computer

Results in memory can be transmitted to the personal computer. He-
alth Care Software System and an Interface Cable are required before
installation. The software can be downloaded from the home page
of TaiDoc, Inc. The interface cable is an optional accessory. To learn
more about Diabetes Management Software or to obtain an Interface
Cable separately, please contact your local customer service.
STEP 1. Install Software
Install Health Care Software System on your Computer by following
the instructions provided on TaiDoc's website:
www.taidoc.com
STEP 2. Connect to Personal Computer
Connect the interface cable to a serial port of your computer. With the
meter turned off, connect the Interface Cable to the Data Port of the
meter. "PC" will appear on the display, indicating that the meter is rea-
dy to transmit data.
Step 3 Transmit Data
Follow the instructions provided in the software to transmit data. Re-
sults transmitted will include date and time. Remove the cable and the
meter will automatically turn off.
PLEASE NOTE
While the meter is connected to the PC, it is unable to perform a
blood glucose test.
98

CARING FOR YOUR METER AND TEST STRIPS

To avoid the meter and test strips getting dirt, dust or other con-
taminants, please wash and dry your hands thoroughly before
use.

Cleaning

1. To clean the meter exterior, wipe with a cloth moistened with tap wa-
ter or a mild cleaning agent, then dry the device with a soft and dry
cloth. Do not flush with water.
2. Do not use organic solvents to clean the meter.

Storage

1. Meter Storage
Storage condition: -20°C~60°C
(-4°F~140°F) below 95% relative
humidity.
Always store or transport the meter
in its original storage case.
Avoid dropping and strong impact.
Avoid direct sunlight and humidity.
99