Herunterladen Inhalt Inhalt Diese Seite drucken

Switching On The Appliance - Nordmende RIUF101NMA+ Bedienungsanleitung

Eingebauter gefrierschrank
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

• Do not eat ice, which has just been removed from the freezer.
• The appliance is not intended for use by people (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning use of the appliance by
a person responsible for their safety. Children should be supervised to ensure that
they don't play with the appliance.
• If the supply cord is damaged it must be replaced by the manufacturer or service
agent or similary qualified people in order to avoid a hazard.
Warning: Do not use mechanical devices or other artificial means to accelerate the
defrosting process. Do not use electrical appliances in the food storage of the appliance.
Keep the appliance ventilation openings free. Do not damage the refrigerator's refrigerant
circuit.

Switching On the Appliance

• Before switching on, place the appliance on upright position
and wait at least three hours without moving the appliance. This
will give the refrigerant circuit time to settle and operate
efficiently.
• Clean the appliance thoroughly, especially in the interior, before use (See Cleaning
and Maintenance).
• Installation of the appliance and electrical connections must be
carried out by a qualified technician, in accordance with the
Installation Manual and local regulations.
• Installation procedure into the kitchen unit is given in the
Installation Manual. This product is intended to be used in
proper kitchen units only.
• The appliance must be connected with a properly installed fused
socket. Power supply (AC) and voltage at the operating point
must with the details on the name plate of the appliance (name
plate is located on the inside left of the appliance).
• Insert the plug into a socket with an efficient ground connection.
If the socket has no ground contact or the plug does not match,
we suggest you to call an authorized electrician for assistance.
• Manufacturer is not responsible for failure to complete the ground connection as
described in this booklet.
• There can be an odor when you first switch on the appliance. It will disappear after
the appliance starts to cool.
EN - 4 -

Werbung

Kapitel

Inhaltsverzeichnis
loading

Inhaltsverzeichnis