Werbung
Verfügbare Sprachen
Verfügbare Sprachen
IMPORTANT INFORMATION
Rayo i5 Mini Beamer
Item no. 1419887
Intended use
This product is a mobile device that is designed to project images, graphics and videos onto white walls,
projection screens and other bright surfaces. It can project photos and videos from your PC, Mac, smartphone,
tablet and Apple iOS devices via Wi-Fi. The projection options vary depending on your operating system.
The product features a built-in rechargeable battery.
It is intended for indoor use only. Do not use it outdoors. Contact with moisture, e.g. in bathrooms, must be
avoided under all circumstances.
For safety and approval purposes (CE), you must not rebuild and/or modify this product. If you use the
product for purposes other than those described above, the product may be damaged. In addition, improper
use can cause hazards such as short circuiting, fire, electric shock etc. Read the instructions carefully and
keep them. Make this product available to third parties only together with its operating instructions.
This product complies with the statutory national and European requirements. All company names and
product names are trademarks of their respective owners. All rights reserved.
HDMI is a registered trademark of HDMI Licensing L.L.C.
Delivery content
• Rayo i5 Mini Beamer
• Power adapter
• Stand
• HDMI cable
Up-to-date Operating Instructions
1. Open www.conrad.com/downloads in a browser or scan the displayed
QR code.
2. Select document type and language and enter the item number into the search
field. After submitting the query you can download displayed records.
Safety instructions
Read the operating instructions carefully and especially observe the safety information.
If you do not follow the safety instructions and information on proper handling in this
manual, we assume no liability for any resulting personal injury or damage to property.
Such cases will invalidate the warranty/guarantee.
a) Persons / Product
• The device is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. This may become dangerous playing
material for children.
• Protect the product from extreme temperatures, direct sunlight, strong jolts, high humidity,
moisture, flammable gases, vapours and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, take it out of operation and protect it from
any accidental use. Safe operation can no longer be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stresses.
• Please handle the product carefully. Jolts, impacts or a fall even from a low height can damage
the product.
• The device may become hot during use. Do not touch the exterior of the device during use.
Let the product cool down after use before touching or cleaning the exterior.
• Never place the product on a table or other surface during use, as it will become hot and may
damage the surface.
• In order to ensure sufficient ventilation, the device or its ventilation slots must not be covered.
In addition, air circulation should not be impaired by objects such as magazines, table clothes,
curtains and other objects. During operation, keep a minimum distance of 0.5 m around the
device. The product will become hot during use. Only use the product with the included
stand to ensure that there is sufficient ventilation under the product.
• Attention, LED light:
- Do not look directly into the LED light!
- Do not look into the beam directly or with optical instruments!
• Never look straight into the light source during operation. The bright flashes of light may
temporarily impair your vision. In addition, epileptic fits may be triggered under certain
circumstances in persons sensitive to such lights. This particularly applies to epileptics.
Version 03/16
• USB-OTG cable
• Warning sticker for LED risk group 2
• Operating instructions
• Important information
• The product belongs to LED risk group 2. LED warning signs in different languages are
included with the product. If the warning sign on the product is not in your local language,
attach the corresponding sign to the device.
CAUTION Possibly hazardous optical radiation emitted from this product
• Never pour any liquids over electrical devices or put objects filled with liquid right next to the
device. If liquid or an object enters the interior of the device nevertheless, first power down the
respective socket (e.g. switch off circuit breaker) and then pull the mains plug from the mains
socket. Do not operate the product anymore afterwards, but take it to a specialist workshop.
• Never use the product immediately after it has been brought from a cold room into a warm one.
The condensation generated could destroy the product. The plug-in power supply unit also
involves danger to life by electric shock! Allow the product to reach room temperature before
connecting it to the power supply and putting it to use. This may take several hours.
• The mains outlet must be located near to the device and be easily accessible.
• As power supply, only use the supplied mains adapter.
• Only connect the power adapter to a normal mains socket connected to the public supply.
Before plugging in the power adapter, check whether the voltage stated on the power adapter
complies with the voltage of your electricity supplier.
• Never connect or disconnect power adapters if your hands are wet.
• Never unplug the power adapter from the mains socket by pulling on the cable; always use
the grips on the plug.
• When setting up the product, make sure that the cable is not pinched, kinked or damaged by
sharp edges.
• Always lay the cables so that nobody can trip over or become entangled in them. This poses
a risk of injury.
• For safety reasons, disconnect the power adapter from the mains socket during storms.
• If the wall plug transformer is damaged, do not touch it; there is danger to life from electric
shock! First, switch off the mains voltage to the mains socket to which the wall plug transformer
is connected (switch off at the corresponding circuit breaker or remove the safety fuse, then
switch off at the corresponding RCD protective switch, so that all poles of the mains socket are
disconnected). You can then unplug the wall plug transformer from the mains socket. Dispose
of the faulty wall plug transformer in an environmentally friendly way; do not use it any more.
Replace it with a wall plug transformer of the same design.
• Adjust the focus wheel slowly as it is very sensitive. Use the product carefully to prolong its
lifespan.
• Do not insert any sharp objects into the openings on the product. This may damage the product
and cause an electrical shock.
• Do not place any heavy objects on the product or load it with other objects, otherwise you may
destroy the sensitive components inside the product.
• If foreign objects enter the product interior, disconnect the power adapter from the power supply
and contact the technical support team or a technician.
• Do not leave the product in a vehicle, otherwise it may be damaged by heat.
• Also observe the safety and operating instructions of any other devices which are connected
to the product.
b) Rechargeable battery
• Never damage the rechargeable battery. Damaging the casing of the rechargeable battery
might cause an explosion or a fire!
• Never short-circuit the contacts of the rechargeable battery. Do not throw the battery or the
product into fire. There is a danger of fire and explosion!
• Charge the rechargeable battery regularly, even if you do are not using the product. Due to the
rechargeable battery technology being used, you do not need to discharge the rechargeable
battery first.
• Never charge the rechargeable battery of the product unattended.
• When charging, place the product on a surface that is not heat-sensitive. It is normal that a
certain amount of heat is generated during charging.
• The rechargeable battery is permanently built into the product and cannot be replaced.
c) Miscellaneous
• Consult an expert when in doubt about operation, safety or connection of the device.
• Maintenance, modifications and repairs are to be performed exclusively by an expert or at a
qualified shop.
• If you have questions which remain unanswered by these operating instructions, contact our
technical support service or other technical personnel.
Important usage information
• The beamer will become hot during use.
• Secure the stand included with the product to the bottom of the beamer to ensure that there
is sufficient ventilation under the product, otherwise the beamer may overheat and become
damaged.
• Do not touch the beamer when it is too hot, otherwise you may burn yourself!
Risk Group 2
Werbung
