Konig Electronic CMP-WNROUT50 Anleitung Seite 8

2.4 Quick Wizard Install Mode Setup
1. Check if the router is powered on.
2. Check if your network adapter is connected
to the LAN port of the router.
3. Check if your network adapter has an IP
address.
Click "Next" to continue.
2.5 Wireless Setting
Key in the SSID, Channel and Security
options, and then click "Next" to continue.
2.6 Auto Detect WAN Service.
Click "Next" to continue.
Disable this function by selecting "Let me
select WAN service by myself".
Note: This function only supports
detecting the Dynamic and PPPoE WAN
Services.
8