Konig Electronic CMP-WNROUT50 Anleitung Seite 5

LED INDICATORS
LED status
Status Green flash
Green
WAN LED
Green flash
Green
LAN LED
Green flash
Green
Green flash
WiFi LED
Green fast flash
Dark green
BUTTON DEFINITION
Description
CMP-WNROUT55
When Wireless is On, press this button (about 1 sec) to execute WPS function
CMP-WNROUT60
WPS
1. When Wireless is off, press this button (about 1 sec) to enable "Wireless
Radio"
2. When Wireless is On, press this button (about 1 sec) to execute WPS function
Wireless On
(CMP-WNROUT55 When Wireless is off, press this button (about 1 sec) to enable "Wireless Radio"
only)
CMP-WNROUT55
1. Press this button then Power on the device
2. Press for about 3 – 4 seconds, the device will reset to default then the Status
LED flashes per sec in Normal status
Notice: If the Status LED flashes very fast, it means this button was pressed too
Reset
long and to please try again
CMP-WNROUT60
Press 6 seconds to reset to default settings then release the button when the
device works simultaneously
Description
Device status is working
RJ45 cable is plugged in
Data access
RJ45 cable is plugged in
Data access
WLAN is on
Data access
Device is in WPS PBC mode
Wi-Fi Radio is disabled
5