External Microphone - ALAN Electronics reer 5006 SCOPI Bedienungsanleitung

•
Press the button
and the parent unit plays a melody. Now you can be sure that you are at your
present position exactly within the communication range!

External Microphone

For the baby monitor function we supply an external microphone (type BM 1). We recommend
it to use always in case of baby monitoring. This has the following advantages:
•
It is more sensitive than the build-in microphone and it responds to a greater distance.
•
It allows you to extend the distance between transceiver and baby cot – HF radiation
is greatly reduced!
•
It allows you to position the radio in optimum location, such as the windowsill or high
up on a wardrobe.
Please locate the BM1 microphone in a position where the baby cannot reach it. Use the
supplied sticky pad to safely attach the microphone.
Connect the microphone to the MIC jack on the side of the baby unit. Flap the rubber cap open
and use the bottom jack.
Chapter 2: Advanced Functions and Use As PMR 446 Transceiver
By default (or after storing the radios with removed battery packs) both units are in equal
transceiver mode. They can be used for different purposes; as walkie-talkies for older children,
during hikes and trips, events, maintenance work in and around the house, where
communication is needed and for many more purposes. The communication range is up to 5
km, depending on the terrain, in open spaces with no obstructions or reduced range in the city.
Use With Default Setting And No Further Programming
•
Insert the batteries (as described on page 4).
In case you are using individual AAA batteries instead of the supplied rechargeable battery
pack, please observe the correct polarity.
•
Press
and wait a few seconds. The baby unit answers your request
for approx. 3 seconds to turn both units on.
8