Tech 21 EvoXploreriP6 Bedienungsanleitung Seite 10

Note: We
manufacturer's instructions to setup the Touch ID on
your device prior to installing your Evo Xplorer.
DEVICE REMOVAL
1. Remove the back of the case by following the
instructions shown on page 4.
2. Holding the front of the case, gently tap the
case against the palm of your hand allowing
the device to drop out. Do not push the device
out of the case by pressing on the protective
screen film as this may damage the water tight
seal around it.
2.
HEADPHONE ADAPTER
1. Unscrew the headphone jack cover.
2. Insert the adapter and screw it in securely.
3. Plug your headphone jack into the adapter.
A wrist strap has been supplied for added
security.
1.
2.
10 ENGLISH
recommend that you
3.
follow the