Connections; Software Update; Functions; Repeat Dmx Signal - Mbnled Dmx Rdm Bedienungsanleitung

MBNLED DMX RDM REPEATER

Connections

 Power: 100-240V AC 50-60Hz
 DMX in: 5pin XLR
 DMX out: 5pin XLR
 USB: PC connection, cable A-B
Software upgrade
The firmware of the device can be updated. The update possible via USB port but
also via DMX input. You can ask your distributor for necessary PC software and for
more information.

FUNCTIONS

After connecting the power cable the device will be ready to use.

REPEAT DMX SIGNAL

If a DMX signal is received at a DMX input, the INPUT button LED will blink fast RED
and the device sends it immediately to the DMX output.
The DMX signal will be regenerated by the device so the signal will be totally
renewed including its electric and digital parameters.
www.mbnled.com 9 info@mbnled.com