Herunterladen Inhalt Inhalt
Teilen
Diese Seite drucken
  1. Anleitungen
  2. Marken
  3. IEI Anleitungen
  4. PCI-Karten
  5. PCIE-Q170
  6. Bedienungsanleitung

IEI PCIE-Q170 Bedienungsanleitung

Vorschau ausblenden Andere Handbücher für PCIE-Q170:
Inhaltsverzeichnis

Werbung

Quicklinks

Diese Anleitung herunterladen
HPCIE-Q170 Half-size PICMG 1.3 CPU Card
MODEL:
HPCIE-Q170
Half-Size PICMG 1.3 CPU Card Supports 6th Generation
LGA1151 Intel® Core™ i7/i5/i3, Pentium® or Celeron® CPU,
Intel® Q170 Chipset, DDR4 SO-DIMM, Dual Intel® PCIe GbE,
VGA, iDP, USB 3.0, SATA 6Gb/s, mSATA, Intel® AMT and RoHS
User Manual
Page i
Rev. 1.01 – February 6, 2017

Werbung

Inhaltsverzeichnis
loading

Verwandte Anleitungen für IEI PCIE-Q170

Inhaltszusammenfassung für IEI PCIE-Q170

  • Seite 1 HPCIE-Q170 Half-size PICMG 1.3 CPU Card MODEL: HPCIE-Q170 Half-Size PICMG 1.3 CPU Card Supports 6th Generation LGA1151 Intel® Core™ i7/i5/i3, Pentium® or Celeron® CPU, Intel® Q170 Chipset, DDR4 SO-DIMM, Dual Intel® PCIe GbE, VGA, iDP, USB 3.0, SATA 6Gb/s, mSATA, Intel® AMT and RoHS User Manual Page i Rev.
  • Seite 2 HPCIE-Q170 Half-size PICMG 1.3 CPU Card Revision Date Version Changes February 6, 2017 1.01 Updated 2.4 Optional Items October 24, 2016 1.00 Initial release Page ii...
  • Seite 3 HPCIE-Q170 Half-size PICMG 1.3 CPU Card Copyright COPYRIGHT NOTICE The information in this document is subject to change without prior notice in order to improve reliability, design and function and does not represent a commitment on the part of the manufacturer. In no event will the manufacturer be liable for direct, indirect, special, incidental, or consequential damages arising out of the use or inability to use the product or documentation, even if advised of the possibility of such damages.

  • Seite 4: Manual Conventions

    HPCIE-Q170 Half-size PICMG 1.3 CPU Card Manual Conventions WARNING Warnings appear where overlooked details may cause damage to the equipment or result in personal injury. Warnings should be taken seriously. CAUTION Cautionary messages should be heeded to help reduce the chance of losing data or damaging the product.

  • Seite 5: Inhaltsverzeichnis

    HPCIE-Q170 Half-size PICMG 1.3 CPU Card Table of Contents 1 INTRODUCTION......................1 1.1 I ......................2 NTRODUCTION 1.2 F ........................3 EATURES 1.3 C ......................4 ONNECTORS 1.4 D ....................... 5 IMENSIONS 1.5 D ........................ 6 1.6 T ..................7 ECHNICAL PECIFICATIONS 2 PACKING LIST ......................
  • Seite 6 HPCIE-Q170 Half-size PICMG 1.3 CPU Card 3.2.11 Front Panel Connector................... 27 3.2.12 I C Connector ....................28 3.2.13 Internal DisplayPort Connector ..............29 3.2.14 Keyboard and Mouse Connector ..............30 3.2.15 LAN LED Connectors ..................31 3.2.16 PCIe Mini Slot....................32 3.2.17 Power Button ....................
  • Seite 7 5.3.6.1 Legacy Console Redirection Settings ............80 5.3.7 CPU Configuration ..................81 5.3.8 SATA Configuration..................83 5.3.9 NVMe Configuration..................84 5.3.10 USB Configuration..................85 5.3.11 iEi Feature...................... 86 5.4 C ........................87 HIPSET 5.4.1 System Agent (SA) Configuration ..............88 5.4.1.1 Graphics Configuration................
  • Seite 8 HPCIE-Q170 Half-size PICMG 1.3 CPU Card 5.7 S & E ......................101 6 SOFTWARE DRIVERS .................... 102 6.1 A ................103 VAILABLE OFTWARE RIVERS 6.2 S ..................103 OFTWARE NSTALLATION A REGULATORY COMPLIANCE ................105 B PRODUCT DISPOSAL .................... 107 C BIOS OPTIONS ......................
  • Seite 9 HPCIE-Q170 Half-size PICMG 1.3 CPU Card List of Figures Figure 1-1: HPCIE-Q170 .........................2 Figure 1-2: Connectors ........................4 Figure 1-3: HPCIE-Q170 Dimensions (mm)..................5 Figure 1-4: Data Flow Diagram......................6 Figure 3-1: Peripheral Interface Connectors ................16 Figure 3-2: +12V ATX Power Connector Pinout Location ............18 Figure 3-3: Audio Connector Location ..................19 Figure 3-4: Battery Connector Location..................20 Figure 3-5: Buzzer Connector Location ..................21...
  • Seite 10 HPCIE-Q170 Half-size PICMG 1.3 CPU Card Figure 4-1: Disengage the CPU Socket Load Lever..............45 Figure 4-2: Remove Protective Cover..................46 Figure 4-3: Insert the Socket LGA1151 CPU................47 Figure 4-4: Close the Socket LGA1151 ..................47 Figure 4-5: Cooling Kit Support Bracket ..................49 Figure 4-6: SO-DIMM Installation ....................50 Figure 4-7: Removing the Retention Screw ................51 Figure 4-8: Inserting the Full-size PCIe Mini Card into the Slot at an Angle ......51...
  • Seite 11 HPCIE-Q170 Half-size PICMG 1.3 CPU Card List of Tables Table 1-1: HPCIE-Q170 Specifications ..................9 Table 2-1: Packing List.........................12 Table 2-2: Optional Items......................14 Table 3-1: Peripheral Interface Connectors ................17 Table 3-2: External Peripheral Connectors................18 Table 3-3: +12V ATX Power Connector Pinouts ................19 Table 3-4: Audio Connector Pinouts ..................19 Table 3-5: Battery Connector Pinouts ..................20 Table 3-6: Buzzer Connector Pinouts..................21...
  • Seite 12 HPCIE-Q170 Half-size PICMG 1.3 CPU Card Table 4-1: AT/ATX Power Mode Switch Settings...............55 Table 4-2: BIOS Switch Settings ....................56 Table 4-3: PCIe x16 Channel Mode Setup ..................57 Table 4-4: Flash Descriptor Security Override Jumper Settings..........57 Table 4-5: BIOS Options and Configured USB Ports..............58 Table 4-6: USB Power Source Setup ..................58 Table 5-1: BIOS Navigation Keys ....................66 Table 5-2: BIOS Options and Configured USB Ports..............94...
  • Seite 13 BIOS Menu 13: SATA Configuration ...................83 BIOS Menu 14: NVMe Configuration...................84 BIOS Menu 15: USB Configuration .....................85 BIOS Menu 16: iEi Feature......................86 BIOS Menu 17: Chipset ........................87 BIOS Menu 18: System Agent (SA) Configuration ..............88 BIOS Menu 19: Graphics Configuration ..................89 BIOS Menu 20: PEG Port Configuration..................91...

  • Seite 14: Introduction

    HPCIE-Q170 Half-size PICMG 1.3 CPU Card Chapter Introduction Page 1...

  • Seite 15: Ntroduction

    HPCIE-Q170 Half-size PICMG 1.3 CPU Card 1.1 Introduction Figure 1-1: HPCIE-Q170 The HPCIE-Q170 is a half-size PICMG 1.3 CPU card. It accepts a Socket LGA1151 Intel® Core™ i7/i5/i3, Pentium® or Celeron® processor and supports two 260-pin 2133/1867 MHz dual-channel DDR4 SO-DIMM modules up to 32 GB. The HPCIE-Q170 provides two GbE interfaces through the Intel®...

  • Seite 16: Eatures

    HPCIE-Q170 Half-size PICMG 1.3 CPU Card 1.2 Features Some of the HPCIE-Q170 motherboard features are listed below: Half-size PICMG 1.3 CPU card 6th generation LGA1151 Intel® Core™ i7/i5/i3, Pentium® or Celeron® processor supported Intel® Q170 chipset Two 260-pin 2133/1867 MHz dual-channel non-ECC unbuffered DDR4 SO-DIMMs support (system max.

  • Seite 17: Connectors

    HPCIE-Q170 Half-size PICMG 1.3 CPU Card 1.3 Connectors The connectors on the HPCIE-Q170 are shown in the figure below. Figure 1-2: Connectors Page 4...

  • Seite 18: Dimensions

    HPCIE-Q170 Half-size PICMG 1.3 CPU Card 1.4 Dimensions The main dimensions of the HPCIE-Q170 are shown in the diagram below. Figure 1-3: HPCIE-Q170 Dimensions (mm) Page 5...

  • Seite 19: Data Flow

    HPCIE-Q170 Half-size PICMG 1.3 CPU Card 1.5 Data Flow Figure 1-4 shows the data flow between the system chipset, the CPU and other components installed on the motherboard. Figure 1-4: Data Flow Diagram Page 6...

  • Seite 20: Echnical Specifications

    Ethernet Controllers LAN2: Intel® I211 PCIe GbE controller Audio Supports 7.1-channel HD audio by IEI AC-KIT-892HD kit One PCIe Mini slot supports mSATA and USB 2.0 16-lane PCIe link from CPU via golden finger: Supports one PCIe x16, or two PCIe x8, or two PCIe x4 + one...
  • Seite 21 HPCIE-Q170 Half-size PICMG 1.3 CPU Card External I/O Interface Connectors One VGA connector Display Output Ethernet Two RJ-45 ports Two USB 3.0 ports * The Windows® 7 installation media does not include native driver support for USB 3.0. In order to use the USB keyboard or USB 3.0 mouse connected to a USB 3.0 port during OS installation, the user has to update the Windows®...

  • Seite 22: Table 1-1: Hpcie-Q170 Specifications

    HPCIE-Q170 Half-size PICMG 1.3 CPU Card Operating -20ºC ~ 60ºC Temperature Storage -30ºC ~ 70ºC Temperature Operating Humidity 5% ~ 95% (non-condensing) Physical Specifications Dimensions 185 mm x 126 mm Weight (GW/NW) 1000 g/420 g Table 1-1: HPCIE-Q170 Specifications Page 9...

  • Seite 23: Packing List

    HPCIE-Q170 Half-size PICMG 1.3 CPU Card Chapter Packing List Page 10...

  • Seite 24: Anti-Static Precautions

    HPCIE-Q170 Half-size PICMG 1.3 CPU Card 2.1 Anti-static Precautions WARNING! Static electricity can destroy certain electronics. Make sure to follow the ESD precautions to prevent damage to the product, and injury to the user. Make sure to adhere to the following guidelines: Wear an anti-static wristband: Wearing an anti-static wristband can prevent electrostatic discharge.

  • Seite 25: Packing List

    NOTE: If any of the components listed in the checklist below are missing, do not proceed with the installation. Contact the IEI reseller or vendor the HPCIE-Q170 was purchased from or contact an IEI sales representative directly by sending an email to ales@ieiworld.com.

  • Seite 26: Optional Items

    High-performance LGA1155/LGA1156 cooler kit (1U chassis compatible, 73W) (P/N: CF-1156A-RS-R11) LGA1155/LGA1156 cooler kit (1U chassis compatible, 45W) (P/N: CF-1156C-RS) LGA1155/LGA1156 cooler kit (1U chassis compatible, 65W) (P/N: CF-1156D-RS) DisplayPort to HDMI converter board (for IEI iDP connector) (P/N: DP-HDMI-R10) Page 13...

  • Seite 27: Table 2-2: Optional Items

    Item and Part Number Image DisplayPort to LVDS converter board (for IEI iDP connector) (P/N: DP-LVDS-R10) DisplayPort to VGA converter board (for IEI iDP connector) (P/N: DP-VGA-R10) DisplayPort to DVI-D converter board (for IEI iDP connector) (P/N: DP-DVI-R10) DisplayPort to DisplayPort converter board (for IEI iDP...

  • Seite 28: Connectors

    HPCIE-Q170 Half-size PICMG 1.3 CPU Card Chapter Connectors Page 15...

  • Seite 29: Peripheral Interface Connectors

    HPCIE-Q170 Half-size PICMG 1.3 CPU Card 3.1 Peripheral Interface Connectors This chapter details all the peripheral interface connectors. 3.1.1 HPCIE-Q170 Layout The figure below shows all the peripheral interface connectors. Figure 3-1: Peripheral Interface Connectors Page 16...

  • Seite 30: Peripheral Interface Connectors

    HPCIE-Q170 Half-size PICMG 1.3 CPU Card 3.1.2 Peripheral Interface Connectors The table below lists all the connectors on the board. Connector Type Label 4-pin Molex power +12V ATX power supply connector CPU12V1 connector Audio kit connector 10-pin header J_AUDIO1 Battery connector 2-pin wafer BAT1 Buzzer connector...

  • Seite 31: External Interface Panel Connectors

    HPCIE-Q170 Half-size PICMG 1.3 CPU Card 3.1.3 External Interface Panel Connectors The table below lists the connectors on the external I/O panel. Connector Type Label Ethernet ports RJ-45 LAN1, LAN2 USB 3.0 ports USB 3.0 CN1, CN2 VGA connector 15-pin female VGA1 Table 3-2: External Peripheral Connectors 3.2 Internal Peripheral Connectors...

  • Seite 32: Audio Kit Connector

    HPCIE-Q170 Half-size PICMG 1.3 CPU Card Description Description +12V +12V Table 3-3: +12V ATX Power Connector Pinouts 3.2.2 Audio Kit Connector CN Label: J_AUDIO1 CN Type: 10-pin header, p=2.00 mm CN Location: See Figure 3-3 CN Pinouts: See Table 3-4 This connector allows connection to an external audio kit.

  • Seite 33: Battery Connector

    HPCIE-Q170 Half-size PICMG 1.3 CPU Card 3.2.3 Battery Connector CAUTION: Risk of explosion if battery is replaced by an incorrect type. Only certified engineers should replace the on-board battery. Dispose of used batteries according to instructions and local regulations. CN Label: BAT1 CN Type: 2-pin wafer, p=1.25 mm...

  • Seite 34: Buzzer Connector

    HPCIE-Q170 Half-size PICMG 1.3 CPU Card 3.2.4 Buzzer Connector CN Label: 2-pin wafer, p=1.25 mm CN Type: CN Location: See Figure 3-5 CN Pinouts: See Table 3-6 The buzzer connector is connected to the buzzer. Figure 3-5: Buzzer Connector Location Description +V5S Table 3-6: Buzzer Connector Pinouts...

  • Seite 35: Crt Fw Update Connector

    HPCIE-Q170 Half-size PICMG 1.3 CPU Card Figure 3-6: Chassis Intrusion Connector Location Description +3.3VSB CHASSIS OPEN Table 3-7: Chassis Intrusion Connector Pinouts 3.2.6 CRT FW Update Connector CN Label: J_CRTFW1 CN Type: 3-pin header, p=2.00 mm CN Location: See Figure 3-7 See Table 3-8 CN Pinouts: The CRT FW update connector is used to update the CRT firmware.

  • Seite 36: Ddr4 So-Dimm Slots

    HPCIE-Q170 Half-size PICMG 1.3 CPU Card Description Table 3-8: CRT FW Update Connector Pinouts 3.2.7 DDR4 SO-DIMM Slots CN Label: DIMM1, DIMM2 CN Type: 260-pin DDR4 SO-DIMM slot CN Location: F igure 3-8 The SO-DIMM slots are for installing the DDR4 SO-DIMMs. Figure 3-8: DDR4 SO-DIMM Slot Locations Page 23...

  • Seite 37: Digital I/O Connector

    HPCIE-Q170 Half-size PICMG 1.3 CPU Card 3.2.8 Digital I/O Connector CN Label: DIO1 10-pin header, p=2.00 mm CN Type: CN Location: See Figure 3-9 CN Pinouts: See Table 3-9 The digital I/O connector provides programmable input and output for external devices. Figure 3-9: Digital I/O Connector Location Description Description...

  • Seite 38: Ec Debug Connector

    HPCIE-Q170 Half-size PICMG 1.3 CPU Card 3.2.9 EC Debug Connector CN Label: 20-pin wafer, p=0.5 mm CN Type: CN Location: See Figure 3-10 CN Pinouts: See Table 3-10 The EC debug connector is used for EC debug. Figure 3-10: EC Debug Connector Location Description Description EC_EPP_STB#...

  • Seite 39: Fan Connector (Cpu)

    HPCIE-Q170 Half-size PICMG 1.3 CPU Card 3.2.10 Fan Connector (CPU) CN Label: CPU_FAN1 4-pin wafer, p=2.54 mm CN Type: CN Location: See Figure 3-11 CN Pinouts: See Table 3-11 The fan connector attaches to a CPU cooling fan. Figure 3-11: CPU Fan Connector Location Description +12V FANIO...

  • Seite 40: Front Panel Connector

    HPCIE-Q170 Half-size PICMG 1.3 CPU Card 3.2.11 Front Panel Connector CN Label: F_PANEL1 10-pin header, p=2.54 mm CN Type: CN Location: See Figure 3-12 CN Pinouts: See Table 3-12 The front panel connector connects to the indicator LEDs and buttons on the computer's front panel.

  • Seite 41: I 2 C Connector

    HPCIE-Q170 Half-size PICMG 1.3 CPU Card 3.2.12 I C Connector CN Label: I2C1 4-pin wafer, p=1.25 mm CN Type: CN Location: See Figure 3-13 CN Pinouts: See Table 3-13 The I C connector is used to connect I C-bus devices to the motherboard. Figure 3-13: I C Connector Location Description...

  • Seite 42: Internal Displayport Connector

    HPCIE-Q170 Half-size PICMG 1.3 CPU Card 3.2.13 Internal DisplayPort Connector CN Label: 20-pin box header, p=2.00 mm CN Type: CN Location: See Figure 3-14 CN Pinouts: See Table 3-14 The DisplayPort connector supports HDMI, LVDS, VGA, DVI and DisplayPort graphics interfaces with up to 3840x2160 resolutions.

  • Seite 43: Keyboard And Mouse Connector

    HPCIE-Q170 Half-size PICMG 1.3 CPU Card 3.2.14 Keyboard and Mouse Connector CN Label: KB_MS1 6-pin wafer, p=2.00 mm CN Type: CN Location: See Figure 3-15 CN Pinouts: See Table 3-15 The keyboard and mouse connector connects to a PS/2 Y-cable that can be connected to a PS/2 keyboard and mouse.

  • Seite 44: Lan Led Connectors

    HPCIE-Q170 Half-size PICMG 1.3 CPU Card 3.2.15 LAN LED Connectors CN Label: LED_LAN1, LED_LAN2 2-pin header, p=2.54 mm CN Type: CN Location: F igure 3-16 CN Pinouts: T able 3-16 and Table 3-17 The LAN LED connectors are used to connect to the LAN LED indicators on the chassis to indicate users the link activities of the two LAN ports.

  • Seite 45: Pcie Mini Slot

    HPCIE-Q170 Half-size PICMG 1.3 CPU Card 3.2.16 PCIe Mini Slot CN Label: MSATA1 PCIe Mini slot CN Type: CN Location: F igure 3-17 CN Pinouts: See Table 3-18 The PCIe Mini slot is for installing a full-size/half-size PCIe Mini expansion card, such as an mSATA SSD or wireless LAN card.

  • Seite 46: Power Button

    HPCIE-Q170 Half-size PICMG 1.3 CPU Card Description Description SMB_CLK SATA_TX- SMB_DATA SATA_TX+ USB_DATA- USB_DATA+ +3.3V +3.3V +3.3V CLINK_CLK CLINK_DATA 1.5V CLINK_RST# MSATA_DET +3.3V Table 3-18: PCIe Mini Slot Pinouts 3.2.17 Power Button CN Label: PWR_SW1 Push button CN Type: CN Location: See Figure 3-18 The on-board power button controls system power.

  • Seite 47: Rs-232/422/485 Serial Port Connectors

    HPCIE-Q170 Half-size PICMG 1.3 CPU Card 3.2.18 RS-232/422/485 Serial Port Connectors CN Label: COM1, COM2 10-pin header, p=2.00 mm CN Type: CN Location: See Figure 3-19 CN Pinouts: See Table 3-19 Each of these connectors provides RS-232/422/485 connections. Figure 3-19: RS-232/422/485 Serial Port Connector Locations Description Description SOUT...

  • Seite 48: Sata 6Gb/S Drive Connector

    HPCIE-Q170 Half-size PICMG 1.3 CPU Card RS-232 Pinouts RS-422 Pinouts RS-485 Pinouts Table 3-20: DB-9 RS-232/422/485 Pinouts 3.2.19 SATA 6Gb/s Drive Connector CN Label: S_ATA1, S_ATA2 CN Type: 7-pin SATA drive connector CN Location: See Figure 3-20 CN Pinouts: See Table 3-21 The SATA drive connectors can be connected to SATA drives and supports up to 6Gb/s data transfer rate.

  • Seite 49: Smbus Connector

    HPCIE-Q170 Half-size PICMG 1.3 CPU Card 3.2.20 SMBus Connector CN Label: SMB1 4-pin wafer, p=1.25 mm CN Type: CN Location: See Figure 3-21 CN Pinouts: See Table 3-22 The SMBus (System Management Bus) connector provides low-speed system management communications. Figure 3-21: SMBus Connector Location Description SMB_DATA SMB_CLK...

  • Seite 50: Spi Flash Connector

    HPCIE-Q170 Half-size PICMG 1.3 CPU Card 3.2.21 SPI Flash Connector CN Label: JSPI1 6-pin wafer, p=1.25 mm CN Type: CN Location: See Figure 3-22 CN Pinouts: See Table 3-23 The SPI flash connector is used to flash the SPI ROM. Figure 3-22: SPI Flash Connector Location Description Description...

  • Seite 51: Usb 2.0 Connectors

    HPCIE-Q170 Half-size PICMG 1.3 CPU Card 3.2.22 USB 2.0 Connectors CN Label: USB1, USB2 8-pin header, p=2.00 mm CN Type: CN Location: See Figure 3-23 CN Pinouts: See Table 3-24 The USB 2.0 connectors connect to USB 2.0 devices. Each pin header provides two USB 2.0 ports.

  • Seite 52: External Peripheral Interface Connector Panel

    HPCIE-Q170 Half-size PICMG 1.3 CPU Card 3.3 External Peripheral Interface Connector Panel The figure below shows the external peripheral interface connector (EPIC) panel. The EPIC panel consists of the following: Figure 3-24: External Peripheral Interface Connector 3.3.1 Ethernet Connectors CN Label: LAN1, LAN2 CN Type: RJ-45...

  • Seite 53: Usb 3.0 Connectors

    HPCIE-Q170 Half-size PICMG 1.3 CPU Card 3.3.2 USB 3.0 Connectors CN Label: CN1, CN2 USB 3.0 CN Type: CN Location: See Figure 3-24 CN Pinouts: See Table 3-26 There is one external USB 3.0 connector on the HPCIE-Q170. Description Description VBUS STDA_SSRX_N STDA_SSRX_P...

  • Seite 54: Figure 3-26: Vga Connector

    HPCIE-Q170 Half-size PICMG 1.3 CPU Card Description Description GREEN BLUE HOT PLUG DETECT DDCDA HSYNC VSYNC DDCCLK Table 3-27: VGA Connector Pinouts Figure 3-26: VGA Connector Page 41...

  • Seite 55: Installation

    HPCIE-Q170 Half-size PICMG 1.3 CPU Card Chapter Installation Page 42...

  • Seite 56: Anti-Static Precautions

    HPCIE-Q170 Half-size PICMG 1.3 CPU Card 4.1 Anti-static Precautions WARNING: Failure to take ESD precautions during the installation of the HPCIE-Q170 may result in permanent damage to the HPCIE-Q170 and severe injury to the user. Electrostatic discharge (ESD) can cause serious damage to electronic components, including the HPCIE-Q170.
  • Seite 57 HPCIE-Q170 Half-size PICMG 1.3 CPU Card WARNING: The installation instructions described in this manual should be carefully followed in order to prevent damage to the components and injury to the user. Before and during the installation please DO the following: Read the user manual: The user manual provides a complete description of the HPCIE-Q170 installation instructions and configuration options.

  • Seite 58: Socket Lga1151 Cpu Installation

    HPCIE-Q170 Half-size PICMG 1.3 CPU Card 4.3 Socket LGA1151 CPU Installation WARNING: CPUs are expensive and sensitive components. When installing the CPU please be careful not to damage it in anyway. Make sure the CPU is installed properly and ensure the correct cooling kit is properly installed.

  • Seite 59: Figure 4-2: Remove Protective Cover

    HPCIE-Q170 Half-size PICMG 1.3 CPU Card Figure 4-2: Remove Protective Cover Step 3: Inspect the CPU socket. Make sure there are no bent pins and make sure the socket contacts are free of foreign material. If any debris is found, remove it with compressed air.

  • Seite 60: Figure 4-3: Insert The Socket Lga1151 Cpu

    HPCIE-Q170 Half-size PICMG 1.3 CPU Card Step 7: Insert the CPU. Gently insert the CPU into the socket. If the CPU pins are properly aligned, the CPU should slide into the CPU socket smoothly. See Figure 4-3. Figure 4-3: Insert the Socket LGA1151 CPU Step 8: Close the CPU socket.

  • Seite 61: Socket Lga1151 Cooling Kit Installation

    ONLY compatible with captive screw type cooling fans. The cooling kit can be bought from IEI. The cooling kit has a heat sink and fan. WARNING: Do not wipe off (accidentally or otherwise) the pre-sprayed layer of thermal paste on the bottom of the heat sink.

  • Seite 62: Figure 4-5: Cooling Kit Support Bracket

    HPCIE-Q170 Half-size PICMG 1.3 CPU Card Figure 4-5: Cooling Kit Support Bracket Step 2: Place the cooling kit onto the socket LGA1151 CPU. Make sure the CPU cable can be properly routed when the cooling kit is installed. Step 3: Mount the cooling kit.

  • Seite 63: So-Dimm Installation

    HPCIE-Q170 Half-size PICMG 1.3 CPU Card 4.5 SO-DIMM Installation To install a SO-DIMM, please follow the steps below and refer to Figure 4-6. Figure 4-6: SO-DIMM Installation Step 1: Open the SO-DIMM socket handles. Open the two handles outwards as far as they can.

  • Seite 64: Figure 4-7: Removing The Retention Screw

    HPCIE-Q170 Half-size PICMG 1.3 CPU Card Step 2: Remove the retention screw. Remove the retention screw as shown in Figure 4-7. Figure 4-7: Removing the Retention Screw Step 3: Insert into the socket at an angle. Line up the notch on the card with the notch on the slot.

  • Seite 65: Half-Size Pcie Mini Card Installation

    HPCIE-Q170 Half-size PICMG 1.3 CPU Card Step 4: Secure the full-size PCIe Mini card. Secure the full-size PCIe Mini card with the retention screw previously removed (Figure 4-9). Step 0: Figure 4-9: Securing the Full-size PCIe Mini Card 4.7 Half-size PCIe Mini Card Installation The PCIe Mini card slot allows installation of either a full-size or half-size PCIe Mini card.

  • Seite 66: Figure 4-10: Removing The Standoff

    HPCIE-Q170 Half-size PICMG 1.3 CPU Card Figure 4-10: Removing the Standoff Step 4: Install the standoff to the screw hole for the half-size PCIe Mini card. Install the previously removed standoff to the screw hole for the half-size PCIe Mini card (Figure 4-11).

  • Seite 67: Figure 4-12: Inserting The Half-Size Pcie Mini Card Into The Slot At An Angle

    HPCIE-Q170 Half-size PICMG 1.3 CPU Card Step 5: Insert into the socket at an angle. Line up the notch on the card with the notch on the slot. Slide the PCIe Mini card into the slot at an angle of about 20º (Figure 4-12).

  • Seite 68: System Configuration

    HPCIE-Q170 Half-size PICMG 1.3 CPU Card 4.8 System Configuration The system configuration should be performed before installation. 4.8.1 AT/ATX Power Mode Setting The AT and ATX power mode selection is made through the AT/ATX power mode switch which is shown in Figure 4-14. Figure 4-14: AT/ATX Power Mode Switch Location Setting Description...

  • Seite 69: Pcie X4 Channel Mode Setup

    HPCIE-Q170 Half-size PICMG 1.3 CPU Card 4.8.3 PCIe x4 Channel Mode Setup The user can select to use either one PCIe x4 slot or four PCIe x1 slots on the backplane via the BIOS switch. Refer to below table for the BIOS switch settings. Setting Description 1-2 (BIOS1)

  • Seite 70: Pcie X16 Channel Mode Setup

    HPCIE-Q170 Half-size PICMG 1.3 CPU Card 4.8.4 PCIe x16 Channel Mode Setup The HPCIE-Q170 supports one PCIe x16 interface on the backplane. The PCIe x16 channel mode setup is made through the BIOS menu in “Chipset System Agent (SA) Configuration PEG Port Configuration”.

  • Seite 71: Usb Power Selection

    HPCIE-Q170 Half-size PICMG 1.3 CPU Card To update the ME firmware, please follow the steps below. Step 1: Before turning on the system power, short pin 2-3 of the flash descriptor security override jumper. Step 2: Update the BIOS and ME firmware, and then turn off the system power. Step 3: Remove the metal clip on the flash descriptor security override jumper or return to its default setting (short pin 1-2).

  • Seite 72: Internal Peripheral Device Connections

    HPCIE-Q170 Half-size PICMG 1.3 CPU Card 4.9 Internal Peripheral Device Connections This section outlines the installation of peripheral devices to the onboard connectors. 4.9.1 SATA Drive Connection The HPCIE-Q170 is shipped with two SATA drive cables. To connect the SATA drives to the connectors, please follow the steps below.

  • Seite 73: Adding Usb 3.0 Drivers To A Windows 7 Installation Image

    HPCIE-Q170 Half-size PICMG 1.3 CPU Card Figure 4-19: SATA Power Drive Connection The SATA power cable can be bought from IEI. See Optional Items in Section 2.4. 4.10 Adding USB 3.0 Drivers to a Windows 7 Installation Image The Windows 7 installation media does not include native driver support for USB 3.0. In order to use the USB keyboard or mouse connected to a USB 3.0 port during OS...

  • Seite 74: Figure 4-20: Windows 7 Usb 3.0 Creator Utility

    HPCIE-Q170 Half-size PICMG 1.3 CPU Card Step 3: Extract the downloaded file to a temporary folder on a computer where the user has logged in as the administrator. NOTE: The OS version of the computer can be Windows 7, Windows 8.1 or Windows 10.

  • Seite 75: Intel ® Amt Setup Procedure

    HPCIE-Q170 Half-size PICMG 1.3 CPU Card Step 8: Wait for the process to finish. It may take up to 15 minutes. Figure 4-21: Update Process is Complete Step 9: Now the user can proceed with the Windows 7 installation using the updated installer.
  • Seite 76 HPCIE-Q170 Half-size PICMG 1.3 CPU Card NOTE: To change the password, enter a new password following the strong password rule (containing at least one upper case letter, one lower case letter, one digit and one special character, and be at least eight characters).

  • Seite 77: Bios

    HPCIE-Q170 Half-size PICMG 1.3 CPU Card Chapter BIOS Page 64...

  • Seite 78: Ntroduction

    HPCIE-Q170 Half-size PICMG 1.3 CPU Card 5.1 Introduction The BIOS is programmed onto the BIOS chip. The BIOS setup program allows changes to certain system settings. This chapter outlines the options that can be changed. NOTE: Some of the BIOS options may vary throughout the life cycle of the product and are subject to change without prior notice.

  • Seite 79: Getting Help

    HPCIE-Q170 Half-size PICMG 1.3 CPU Card Function Main Menu – Quit and not save changes into CMOS Status Page Setup Menu and Option Page Setup Menu -- Exit current page and return to Main Menu General help, only for Status Page Setup Menu and Option Page Setup Menu Load previous values Load optimized defaults...
  • Seite 80 HPCIE-Q170 Half-size PICMG 1.3 CPU Card Aptio Setup Utility – Copyright (C) 2016 American Megatrends, Inc. Main Advanced Chipset Security Boot Save & Exit BIOS Information Set the Date. Use Tab to BIOS Vendor American Megatrends switch between Date Core Version 5.11 elements.

  • Seite 81: Advanced

    > SATA Configuration +/-: Change Opt. > NVMe Configuration General Help > USB Configuration Previous Values > iEi Feature Optimized Defaults Save & Exit ESC: Exit Version 2.17.1255. Copyright (C) 2016 American Megatrends, Inc. BIOS Menu 2: Advanced Page 68...

  • Seite 82: Acpi Settings

    HPCIE-Q170 Half-size PICMG 1.3 CPU Card 5.3.1 ACPI Settings The ACPI Settings menu (BIOS Menu 3) configures the Advanced Configuration and Power Interface (ACPI) options. Aptio Setup Utility – Copyright (C) 2016 American Megatrends, Inc. Advanced ACPI Settings Select the highest ACPI sleep state the system ACPI Sleep State [S3 (Suspend to RAM)]...

  • Seite 83: Amt Configuration

    HPCIE-Q170 Half-size PICMG 1.3 CPU Card 5.3.2 AMT Configuration The AMT Configuration menu (BIOS Menu 4) allows the Intel® AMT options to be configured. Aptio Setup Utility – Copyright (C) 2016 American Megatrends, Inc. Advanced Intel AMT [Enabled] Enable/Disable Intel (R) Un-Configure ME [Disabled] Active Management...

  • Seite 84: Super Io Configuration

    HPCIE-Q170 Half-size PICMG 1.3 CPU Card 5.3.3 Super IO Configuration Use the Super IO Configuration menu (BIOS Menu 5) to set or change the configurations for the serial ports and parallel port. Aptio Setup Utility – Copyright (C) 2016 American Megatrends, Inc. Advanced Super IO Configuration Set Parameters of Serial...

  • Seite 85: Serial Port N Configuration

    HPCIE-Q170 Half-size PICMG 1.3 CPU Card 5.3.3.1 Serial Port n Configuration Use the Serial Port n Configuration menu (BIOS Menu 6) to configure the serial port n. Aptio Setup Utility – Copyright (C) 2016 American Megatrends, Inc. Advanced Serial Port n Configuration Enable or Disable Serial Port (COM) Serial Port...
  • Seite 86 HPCIE-Q170 Half-size PICMG 1.3 CPU Card IO=3F8h; Serial Port I/O port address is 3F8h and the interrupt IRQ=3, 4, 11 address is IRQ3, 4, 11 Serial Port I/O port address is 2F8h and the interrupt IO=2F8h; address is IRQ3, 4, 11 IRQ=3, 4, 11 IO=3E8h;...
  • Seite 87 HPCIE-Q170 Half-size PICMG 1.3 CPU Card IO=2F8h; Serial Port I/O port address is 2F8h and the interrupt IRQ=3 address is IRQ3 Serial Port I/O port address is 3F8h and the interrupt IO=3F8h; address is IRQ3, 4, 11 IRQ=3, 4, 11 IO=2F8h;...

  • Seite 88: Iwdd H/W Monitor

    HPCIE-Q170 Half-size PICMG 1.3 CPU Card 5.3.4 iWDD H/W Monitor The iWDD H/W Monitor menu (BIOS Menu 7) contains the fan configuration submenu, and displays operating temperature, fan speeds and system voltages. Aptio Setup Utility – Copyright (C) 2016 American Megatrends, Inc. Advanced PC Health Status Smart Fan Mode Select...

  • Seite 89: Smart Fan Mode Configuration

    HPCIE-Q170 Half-size PICMG 1.3 CPU Card 5.3.4.1 Smart Fan Mode Configuration Use the Smart Fan Mode Configuration submenu (BIOS Menu 8) to configure fan speed settings. Aptio Setup Utility – Copyright (C) 2016 American Megatrends, Inc. Advanced Smart Fan Mode Configuration Smart Fan Mode Select CPU_FAN1 Smart Fan Control [Auto Mode]...

  • Seite 90: Rtc Wake Settings

    HPCIE-Q170 Half-size PICMG 1.3 CPU Card 5.3.5 RTC Wake Settings The RTC Wake Settings menu (BIOS Menu 9) enables the system to wake at the specified time. Aptio Setup Utility – Copyright (C) 2016 American Megatrends, Inc. Advanced Wake system with Fixed Time [Disabled] Enable or disable System wake on alarm event.

  • Seite 91: Serial Port Console Redirection

    HPCIE-Q170 Half-size PICMG 1.3 CPU Card Wake up minute Wake up second After setting the alarm, the computer turns itself on from a suspend state when the alarm goes off. 5.3.6 Serial Port Console Redirection The Serial Port Console Redirection menu (BIOS Menu 10) allows the console redirection options to be configured.
  • Seite 92 HPCIE-Q170 Half-size PICMG 1.3 CPU Card Terminal Type [ANSI] Use the Terminal Type option to specify the remote terminal type. The target terminal type is VT100 VT100 VT100+ The target terminal type is VT100+ VT-UTF8 The target terminal type is VT-UTF8 ANSI The target terminal type is ANSI EFAULT...

  • Seite 93: Legacy Console Redirection Settings

    HPCIE-Q170 Half-size PICMG 1.3 CPU Card The parity bit is 0 if the number of ones in the data bits is odd. The parity bit is always 1. This option does not Mark provide error detection. Space The parity bit is always 0. This option does not provide error detection.

  • Seite 94: Cpu Configuration

    HPCIE-Q170 Half-size PICMG 1.3 CPU Card Legacy Serial Redirection Port [COM1] Use the Legacy Serial Redirection Port option to select a COM port to display redirection of legacy OS and legacy OPROM messages. Configuration options are listed below. COM1 Default COM2 COM3 (Pci Bus0,Dev22,Func3) 5.3.7 CPU Configuration...
  • Seite 95 HPCIE-Q170 Half-size PICMG 1.3 CPU Card Active Processor Cores [All] Use the Active Processor Cores BIOS option to enable numbers of cores in the processor package. Enable all cores in the processor package. EFAULT Enable one core in the processor package. Enable two cores in the processor package.

  • Seite 96: Sata Configuration

    HPCIE-Q170 Half-size PICMG 1.3 CPU Card Intel TXT(LT) Support [Disabled] Use the Intel TXT(LT) Support option to enable or disable the Intel(R) TXT(LT) support. Disables Intel® TXT(LT) support Disabled Enabled Enables Intel® TXT(LT) support EFAULT 5.3.8 SATA Configuration Use the SATA Configuration menu (BIOS Menu 13) to change and/or set the configuration of the SATA devices installed in the system.

  • Seite 97: Nvme Configuration

    HPCIE-Q170 Half-size PICMG 1.3 CPU Card Hot Plug [Disabled] Use the Hot Plug option to designate the correspondent SATA port as hot-pluggable. Disables the hot-pluggable function of the SATA port. Disabled EFAULT Enabled Designates the SATA port as hot-pluggable. 5.3.9 NVMe Configuration Use the NVMe Configuration (BIOS Menu 14) menu to display the NVMe controller and device information.

  • Seite 98: Usb Configuration

    HPCIE-Q170 Half-size PICMG 1.3 CPU Card 5.3.10 USB Configuration Use the USB Configuration menu (BIOS Menu 15) to read USB configuration information and configure the USB settings. Aptio Setup Utility – Copyright (C) 2016 American Megatrends, Inc. Advanced USB Configuration Enables Legacy USB support.

  • Seite 99: Iei Feature

    HPCIE-Q170 Half-size PICMG 1.3 CPU Card 5.3.11 iEi Feature Use the iEi Feature menu (BIOS Menu 16) to configure One Key Recovery function. Aptio Setup Utility – Copyright (C) 2016 American Megatrends, Inc. Advanced iEi Feature Auto Recovery Function Reboot and recover...

  • Seite 100: Chipset

    HPCIE-Q170 Half-size PICMG 1.3 CPU Card 5.4 Chipset Use the Chipset menu (BIOS Menu 17) to access the PCH IO and System Agent (SA) configuration menus. WARNING! Setting the wrong values for the Chipset BIOS selections in the Chipset BIOS menu may cause the system to malfunction. Aptio Setup Utility –...

  • Seite 101: System Agent (Sa) Configuration

    HPCIE-Q170 Half-size PICMG 1.3 CPU Card 5.4.1 System Agent (SA) Configuration Use the System Agent (SA) Configuration menu (BIOS Menu 18) to configure the System Agent (SA) parameters. Aptio Setup Utility – Copyright (C) 2016 American Megatrends, Inc. Chipset VT-d Supported VT-d capability VT-d...

  • Seite 102: Graphics Configuration

    HPCIE-Q170 Half-size PICMG 1.3 CPU Card 5.4.1.1 Graphics Configuration Use the Graphics Configuration (BIOS Menu 19) menu to configure the video device connected to the system. Aptio Setup Utility – Copyright (C) 2016 American Megatrends, Inc. Chipset Graphics Configuration Select which of IGFX/PEG/PCI Graphics Primary Display [Auto]...
  • Seite 103 HPCIE-Q170 Half-size PICMG 1.3 CPU Card DVMT Pre-Allocated [256M] Use the DVMT Pre-Allocated option to set the amount of system memory allocated to the integrated graphics processor when the system boots. The system memory allocated can then only be used as graphics memory, and is no longer available to applications or the operating system.

  • Seite 104: Peg Port Configuration

    HPCIE-Q170 Half-size PICMG 1.3 CPU Card 5.4.1.2 PEG Port Configuration Aptio Setup Utility – Copyright (C) 2016 American Megatrends, Inc. Chipset PEG Port Configuration Select PEG Port Link Width as x16 or 2x8 PEG Link Width Configuration [1x16] configuration. PEG 0:1:0 Not Present ---------------------- Enable Root Port...

  • Seite 105: Memory Configuration

    HPCIE-Q170 Half-size PICMG 1.3 CPU Card Max Link Speed [Auto] Use the Max Link Speed option to select the maximum link speed of the PCI Express slot. The following options are available: Auto Default Gen1 Gen2 Gen3 Detect Non-Compliance Device [Disabled] Use the Detect Non-Compliance Device option to enable or disable detecting if a non-compliance PCI Express device is connected to the PCI Express slot.

  • Seite 106: Pch-Io Configuration

    HPCIE-Q170 Half-size PICMG 1.3 CPU Card 5.4.2 PCH-IO Configuration Use the PCH-IO Configuration menu (BIOS Menu 22) to configure the PCH parameters. Aptio Setup Utility – Copyright (C) 2016 American Megatrends, Inc. Chipset Auto Power Button Status [Disable (ATX)] Select AC power state Restore AC Power Loss [Last State] when power is re-applied...

  • Seite 107: Table 5-2: Bios Options And Configured Usb Ports

    HPCIE-Q170 Half-size PICMG 1.3 CPU Card USB Power SW1 [+5V DUAL] Use the USB Power SW1 BIOS option to configure the USB power source for the corresponding USB connectors (Table 5-2). Sets the USB power source to +5V +5V DUAL Sets the USB power source to +5V dual EFAULT USB Power SW2 [+5V DUAL]...

  • Seite 108: Pci Express Configuration

    HPCIE-Q170 Half-size PICMG 1.3 CPU Card 5.4.2.1 PCI Express Configuration The PCI Express port number in the PCI Express Configuration menu varies by BIOS (BIOS1 or BIOS2). For detailed information, please refer to Section 4.8.3. For BIOS1: Aptio Setup Utility – Copyright (C) 2016 American Megatrends, Inc. Chipset PCI Express Configuration PCI Express Port 1...
  • Seite 109 HPCIE-Q170 Half-size PICMG 1.3 CPU Card 5.4.2.1.1 PCI Express Port 1/2/3/4 Aptio Setup Utility – Copyright (C) 2016 American Megatrends, Inc. Advanced PCIe Speed [Auto] Select PCI Express port Detect Non-Compliance Device [Disabled] speed. --------------------- : Select Screen ↑ ↓: Select Item Enter: Select +/-: Change Opt.

  • Seite 110: Hd Audio Configuration

    HPCIE-Q170 Half-size PICMG 1.3 CPU Card 5.4.2.2 HD Audio Configuration Use the HD Audio Configuration menu (BIOS Menu 26) to configure the PCH Azalia settings. Aptio Setup Utility – Copyright (C) 2016 American Megatrends, Inc. Chipset HD Audio Configuration Control Detection of the HD-Audio device.

  • Seite 111: Security

    HPCIE-Q170 Half-size PICMG 1.3 CPU Card 5.5 Security Use the Security menu (BIOS Menu 27) to set system and user passwords. Aptio Setup Utility – Copyright (C) 2016 American Megatrends, Inc. Main Advanced Chipset Security Boot Save & Exit Password Description Set Administrator Password If ONLY the Administrator’s password is set,...

  • Seite 112: Boot

    HPCIE-Q170 Half-size PICMG 1.3 CPU Card 5.6 Boot Use the Boot menu (BIOS Menu 28) to configure system boot options. Aptio Setup Utility – Copyright (C) 2016 American Megatrends, Inc. Main Advanced Chipset Security Boot Save & Exit Boot Configuration Select the keyboard Bootup NumLock State [On]...
  • Seite 113 HPCIE-Q170 Half-size PICMG 1.3 CPU Card Quiet Boot [Enabled] Use the Quiet Boot BIOS option to select the screen display when the system boots. Normal POST messages displayed Disabled Enabled OEM Logo displayed instead of POST messages EFAULT Launch PXE OpROM [Disabled] Use the Launch PXE OpROM option to enable or disable boot option for legacy network devices.

  • Seite 114: Ave & Exit

    HPCIE-Q170 Half-size PICMG 1.3 CPU Card 5.7 Save & Exit Use the Safe & Exit menu (BIOS Menu 29) to load default BIOS values, optimal failsafe values and to save configuration changes. Aptio Setup Utility – Copyright (C) 2016 American Megatrends, Inc. Main Advanced Chipset...

  • Seite 115: Software Drivers

    HPCIE-Q170 Half-size PICMG 1.3 CPU Card Chapter Software Drivers Page 102...

  • Seite 116: Vailable Software Drivers

    NOTE: The content of the CD may vary throughout the life cycle of the product and is subject to change without prior notice. Visit the IEI website or contact technical support for the latest updates. The following drivers can be installed on the system:...

  • Seite 117: Figure 6-1: Available Drivers

    HPCIE-Q170 Half-size PICMG 1.3 CPU Card Step 3: A new screen with a list of available drivers appears (Figure 6-1). Figure 6-1: Available Drivers Step 4: Install all of the necessary drivers in this menu. Step 0: Page 104...

  • Seite 118: A Regulatory Compliance

    HPCIE-Q170 Half-size PICMG 1.3 CPU Card Appendix Regulatory Compliance Page 105...
  • Seite 119 HPCIE-Q170 Half-size PICMG 1.3 CPU Card DECLARATION OF CONFORMITY This equipment has been tested and found to comply with specifications for CE marking. If the user modifies and/or installs other devices in the equipment, the CE conformity declaration may no longer apply. FCC WARNING This equipment complies with Part 15 of the FCC Rules.

  • Seite 120: B Product Disposal

    HPCIE-Q170 Half-size PICMG 1.3 CPU Card Appendix Product Disposal Page 107...
  • Seite 121 HPCIE-Q170 Half-size PICMG 1.3 CPU Card CAUTION: Risk of explosion if battery is replaced by an incorrect type. Only certified engineers should replace the on-board battery. Dispose of used batteries according to instructions and local regulations. Outside the European Union–If you wish to dispose of used electrical and electronic products outside the European Union, please contact your local authority so as to comply with the correct disposal method.

  • Seite 122: C Bios Options

    HPCIE-Q170 Half-size PICMG 1.3 CPU Card Appendix BIOS Options Page 109...
  • Seite 123 HPCIE-Q170 Half-size PICMG 1.3 CPU Card Below is a list of BIOS configuration options in the BIOS chapter. 　 System Date [xx/xx/xx] ......................68 　 System Time [xx:xx:xx] .......................68 　 ACPI Sleep State [S3 (Suspend to RAM)]................69 　 Intel AMT [Enabled] ......................70 　...
  • Seite 124 HPCIE-Q170 Half-size PICMG 1.3 CPU Card 　 Legacy USB Support [Enabled]..................85 　 Auto Recovery Function [Disabled]...................86 　 VT-d [Disabled]........................88 　 Primary Display [Auto] ......................89 　 Internal Graphics [Enabled] ....................89 　 DVMT Pre-Allocated [256M] ....................90 　 DVMT Total Gfx Mem [MAX]....................90 　...

  • Seite 125: D Terminology

    HPCIE-Q170 Half-size PICMG 1.3 CPU Card Appendix Terminology Page 112...
  • Seite 126 HPCIE-Q170 Half-size PICMG 1.3 CPU Card AC ’97 Audio Codec 97 (AC’97) refers to a codec standard developed by Intel® in 1997. ACPI Advanced Configuration and Power Interface (ACPI) is an OS-directed configuration, power management, and thermal management interface. AHCI Advanced Host Controller Interface (AHCI) is a SATA Host controller register-level interface.
  • Seite 127 HPCIE-Q170 Half-size PICMG 1.3 CPU Card DIMM Dual Inline Memory Modules are a type of RAM that offer a 64-bit data bus and have separate electrical contacts on each side of the module. The digital inputs and digital outputs are general control signals that control the on/off circuit of external devices or TTL devices.
  • Seite 128 HPCIE-Q170 Half-size PICMG 1.3 CPU Card LVDS Low-voltage differential signaling (LVDS) is a dual-wire, high-speed differential electrical signaling system commonly used to connect LCD displays to a computer. POST The Power-on Self Test (POST) is the pre-boot actions the system performs when the system is turned-on.

  • Seite 129: E Digital I/O Interface

    HPCIE-Q170 Half-size PICMG 1.3 CPU Card Appendix Digital I/O Interface Page 116...

  • Seite 130: Ntroduction

    HPCIE-Q170 Half-size PICMG 1.3 CPU Card E.1 Introduction The DIO connector on the HPCIE-Q170 is interfaced to GPIO ports on the Super I/O chipset. The digital inputs and digital outputs are generally control signals that control the on/off circuit of external devices or TTL devices. Data can be read or written to the selected address to enable the DIO functions.

  • Seite 131: Assembly Language Sample

    HPCIE-Q170 Half-size PICMG 1.3 CPU Card E.2 Assembly Language Sample 1 AX, 6F08H ;setting the digital port as input AL low byte = value AH – 6FH Sub-function: AL – 9 :Set the digital port as OUTPUT :Digital I/O input value E.3 Assembly Language Sample 2 AX, 6F09H ;setting the digital port as output...

  • Seite 132: F Watchdog Timer

    HPCIE-Q170 Half-size PICMG 1.3 CPU Card Appendix Watchdog Timer Page 119...
  • Seite 133 NOTE: The following discussion applies to DOS environment. Contact IEI support or visit the IEI website for specific drivers for other operating systems. The Watchdog Timer is provided to ensure that standalone systems can always recover from catastrophic conditions that cause the CPU to crash. This condition may have occurred by external EMIs or a software bug.
  • Seite 134 HPCIE-Q170 Half-size PICMG 1.3 CPU Card NOTE: When exiting a program it is necessary to disable the Watchdog Timer, otherwise the system resets. EXAMPLE PROGRAM: ; INITIAL TIMER PERIOD COUNTER W_LOOP: AX, 6F02H ;setting the time-out value BL, 30 ;time-out value is 48 seconds ;...

  • Seite 135: G Hazardous Materials Disclosure

    HPCIE-Q170 Half-size PICMG 1.3 CPU Card Appendix Hazardous Materials Disclosure Page 122...
  • Seite 136 HPCIE-Q170 Half-size PICMG 1.3 CPU Card The details provided in this appendix are to ensure that the product is compliant with the Peoples Republic of China (China) RoHS standards. The table below acknowledges the presences of small quantities of certain materials in the product, and is applicable to China RoHS only.
  • Seite 137 HPCIE-Q170 Half-size PICMG 1.3 CPU Card 此附件旨在确保本产品符合中国 RoHS 标准。以下表格标示此产品中某有毒物质的含量符 合中国 RoHS 标准规定的限量要求。 本产品上会附有”环境友好使用期限”的标签，此期限是估算这些物质”不会有泄漏或突变”的 年限。本产品可能包含有较短的环境友好使用期限的可替换元件，像是电池或灯管，这些元 件将会单独标示出来。 部件名称 有毒有害物质或元素 铅 汞 镉 六价铬 多溴联苯 多溴二苯 醚 (Pb) (Hg) (Cd) (CR(VI)) (PBB) (PBDE) 壳体 显示 印刷电路板 金属螺帽 电缆组装 风扇组装 电力供应组装 电池 O: 表示该有毒有害物质在该部件所有物质材料中的含量均在 SJ/T 11363-2006 (现由 GB/T 26572-2011 取代) 标准规定的限量要求以下。...

Inhaltsverzeichnis