Denon Lectern Active Benutzerhandbuch Seite 6

Operation
To power Lectern Active on or off, use the power switch.
To use Lectern Active's microphone:
1. Make sure the microphone is connected properly to the XLR input above the lectern tray.
2. Speak into the microphone and adjust its position, if necessary.
To adjust the microphone volume, turn the Mic Volume knob.
To mute the microphone, press and hold the Mute button next to the XLR input.
To unmute the microphone, release the Mute button.
To power or charge additional devices:
•
AC Power: Connect each device to an AC outlet at its base.
•
USB: Connect each device to the USB port on the rear panel or the USB port above the
lectern tray.
Important: Lectern Active must be powered on to power or charge any connected devices.
To play audio:
1. Connect an audio device to one of the aux inputs—the 1/8" (3.5mm) input using a stereo
1/8" (3.5mm) cable or the RCA inputs using a stereo RCA cable.
2. Play audio on your device.
3. Turn the Aux Volume knob to adjust the output volume level. Also, adjust the input volume
level on your device.
6