Rear Panel; Top Panel - Denon Lectern Active Benutzerhandbuch

Features

Rear Panel

1. Power Input: Insert the included power cable here to
power the unit.
2. Fuse: If the fuse is broken, disconnect the power
cord from the power outlet, and then unscrew this
holder to replace the fuse. Replace it with a fuse with
an appropriate rating (printed under on the rear
panel). Using a fuse with an incorrect rating can
damage the product and/or fuse.
3. Power Switch: Use this switch to power Lectern
Active on or off.
4. Power Light: This light will illuminate when Lectern
Active is powered on.
5. AC Outlet: Connect other devices here. The AC
outlets work when wall power is connected.

Top Panel

1. Mic Volume: Turn this knob to adjust the volume of
the microphone.
2. Aux Input (1/8" / 3.5 mm): Connect a CD player,
digital media player, or other audio source to this
1/8" (3.5 mm) stereo auxiliary input. Control the
volume using the Aux Volume knob.
3. Aux Input (RCA): Connect a CD player, digital media
player, or other audio source to these RCA auxiliary
inputs. Control the volume using the Aux Volume
knob.
4. Aux Volume: Turn this knob to adjust the input
volume of the aux inputs.
5. Output (XLR): Connect this XLR output to another
active (powered) speaker. The level of the output is
controlled by the Mic Volume and Aux Volume knobs.
6. USB Charging Port: Connect your device's charge
cable here to charge it. USB charging only functions
when the unit's power is turned on.
4
5 5
4
1
3
2
4
1 5
2
6
3