Brinno TimeLapse BCC100 Startanleitung

TimeLapse
Construction Camera
GB
BCC BCC100
Quick Guide
w w w . b r i n n o . c o m
CONSTRUCTION CAMERA - BCC100
TimeLapse Camera
1 2 Weather Resistant 3
(TLC200 f1.2)
Housing (ATH110)
BCC100 - Installation
STEP 1. STEP 2.
Insert an SD Card and Insert the Time Lapse Camera into the
switch on the Time Lapse Weather Resistant Housing, confirming
Camera power.
the waterproof seal is aligned correctly.
Keep the inside of the Weather Resistant Housing dry before inserting
the Time Lapse Camera.
Please make sure the Time Lapse Camera lens is positioned
STEP 3.
correctly to fit into the transparent lens (Housing).
Camera Lens
Housing Lens
CORRECT FITTING
Close the Weather Resistant Housing door and latch the
NL buckles (Top and bottom). ( p )
STEP 4. Start Recording
Set up screen
1
1 Sec
1. The LCD will display the set up screen.
2. Set the Time Interval and AVI frame rate.
Camera Wall 4 Rubber Strap
Suggestion
Mount (AWM100)
Depending on big or small construction
project , we suggest below setting:
For weeks
For days
5 Seconds 30 FPS 1 Minute
Seal
For months For > 2 months
10 Minutes 30 FPS
10 Minutes 30 FPS
For more than 6 months using , please choose
Energizer® Ultimate Lithium AA Batteries.
3 Preview screen
3. Press OK to proceed
to the Preview Screen,
frame your subject.
STEP 5. Installation
A
(TLC200 f1.2+AWM100)
STEP 6. Finish
While recording, hold the "OK" button until the LCD light turns on
and shows the text "Processing", it means the camera is processing
file closing. When completed the processing it will display the text
Time Interval AVI frame rate
2 "Ready" This indicates the recording session is complete.
Time Frame Rate
Remove the SD card from the camera, and insert it into your
10 Sec
30 FPS
30 FPS
computer or laptop to enjoy your amazing Time Lapse Videos!
Optional Accessory
4
Preview screen
Brinno Reader
(ABR100)
Play your construction time lapse video on your
smartphone on site.
4. Press OK again to start the
No need to go back to the office with the Brinno
recording process. High Speed On The Go ( OTG ) Reader (ABR100)
*Your Smartphone needs to OTG for this function.
B (TLC200 f1.2+Rubber Strap)
Lock : Lock :
You can lock your You can lo
time lapse time lapse camera
on site to p on site to prevent theft.
Preview screen
SD
ry
more info of ABR100
Motion Sensor
(ATM100)
Upgrade the time lapse camera to a motion
activated camera, detecting any movement
in thearea. Great for Security.
more info of ATM100
7F, No.75, Zhou Zi St., Taipei City11493, Taiwan
Phone: +886-2-8751-0306 Fax: +886-2-8751-0549
customerservice@brinno.com www.brinno.com
Made in Taiwan
301-0063-10 EU A1