Herunterladen Inhalt Inhalt Diese Seite drucken

Chal-Tec 10021734 Bedienungsanleitung Seite 10

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

ECHO DELAY CONTROL: Let you adjust the delay
19
tine for echo.
12V POWER SUPPLY JACK: Allow you to connect
20
12v power supply via this jack.
POWER SWITCH: Use this switch to turn on the
unit after all input devices are already connected
21
to prevent damage to you equipment. Turn the
mixer on before you turn on amplifier and turn of
amplifiers before you turn off the mixer.
EQUALIZER ON/OFF: Press it to turn equalizer on,
22
the indicator light.
MIC BASS: This knob adjusts the bass tone of the
23
microphone.
MIC LEVEL CONTROL: Let you control the MIC
24
level as they enter the mix.
TALK OVER: There are talk over, MIC on and MIC
off function. The Sound Pressure Level of audio
25
from input sources will be decreased while TALK
OVER mode is set
26
MIC CUE: Use it to monitor the MIC input source
KILL FOR BASS: Press it tot kill microphone bass
27
volume, and indicator light.
CHANNEL ASSIGN SELECTOR: Let you select
28
the input source to be mixed by the cross-fader
control.
CROSSFADER
29
Allow you to smooth switch between the input
sources assigned to channel A and channel B.
Rear
10
resident dj
SOUND EFFECTS: Let you create special sound
30
performance mixes from the eight preprogrammed
special effects.
SOUND EFFECTS SPEED CONTROL: Let you
31
control the pitch of the selected sound effect.
SOUND EFFECTS VOLUME CONTROL: Let you
32
control the volume level of the sound effect within
the mix.
ECHO LEVEL CONTROL: Control the depth of the
33
echo effect.
SOUNCD EFFECTS CUE: Let you monitor the
34
selected sound effect before mixing it in.
ECHO REPEAT CONTROL: Let you control the time
35
period during which the echo is repeated.
HEADPHONE CUE/PGM CONTROL: Allow you to
36
listen simultaneously or separately to the CUE
material or the active program.
HEADPHONE JACK: Accept headphone with 1/4"
37
plug.
HEADPHONE LEVEL CONTROL: Let you to control
38
the volume level of headphone.
EFFECT SWITCH (SEND/ RECEIVE): Let you
connect a sound effect device, such as reverb,
39
sampler, etc. and either play the signal from it or
play anpther input through it.
40
MP3 RECORDING AND BLUE TOOTH

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Resident dj10021733

Inhaltsverzeichnis